Shop Page
Filters Sort results
Reset Apply
Pic | Add | Part Number | Description | Details | View | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| All Small Parts (205) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | 2-70-68X | 2-70-68X 7260 Universal Joint Strap KitThe 2-70-68X is a 7260 series universal… Show more (+) 2-70-68X 7260 Universal Joint Strap KitThe 2-70-68X is a 7260 series universal joint strap kit. It secures U-joint caps measuring 1.078″ in diameter, with a bolt center-to-center spacing of 1.5″ and bolt length of 0.62″. Thread specification is .250-28; fasteners torque to 15 ft-lb.SpecificationsPart Number: 2-70-68XSeries: 7260Fits Cap Dia: 1.078″Center to Center: 1.5″Bolt Length: 0.62″Thread Dia: .250-28Bolt Torque: 15 ft-lbWhen installing the 2-70-68X, confirm U-joint cap diameter is 1.078″ before ordering. Mixing strap kits across series produces incorrect center-to-center geometry and unreliable cap retention. Torque fasteners to 15 ft-lb in a cross pattern to seat caps evenly against both yoke ears.The 7260 series defines the cap dimensions this strap is engineered for. The 1.5″ center-to-center dimension must correspond to the slot geometry in your yoke ears. Cross-reference the 2-70-68X against your yoke specification to confirm compatibility before installation. Show less (-) | Bolt Length: 0.62 Bolt Torque: 15 ft-lb Center to Center: 1.5 Fits Cap Dia: 1.078 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | 250-70-18X | 250-70-18X SPL250 Universal Joint Strap KitThe 250-70-18X is a SPL250 series universal… Show more (+) 250-70-18X SPL250 Universal Joint Strap KitThe 250-70-18X is a SPL250 series universal joint strap kit. It secures U-joint caps measuring 2.362″ in diameter, with a bolt center-to-center spacing of 3.444″ and bolt length of 0.984″. Thread specification is M12 X 1.25 6G; fasteners torque to 115 ft-lb.SpecificationsPart Number: 250-70-18XSeries: SPL250Fits Cap Dia: 2.362″Center to Center: 3.444″Bolt Length: 0.984″Thread Dia: M12 X 1.25 6GBolt Torque: 115 ft-lbWhen installing the 250-70-18X, confirm U-joint cap diameter is 2.362″ before ordering. Mixing strap kits across series produces incorrect center-to-center geometry and unreliable cap retention. Torque fasteners to 115 ft-lb in a cross pattern to seat caps evenly against both yoke ears.The SPL250 series defines the cap dimensions this strap is engineered for. The 3.444″ center-to-center dimension must correspond to the slot geometry in your yoke ears. Cross-reference the 250-70-18X against your yoke specification to confirm compatibility before installation. Show less (-) | Bolt Length: 984 Bolt Torque: 115 ft-lb Center to Center: 3.444 Fits Cap Dia: 2.362 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | 2670-10 | 2670-10 7260 Universal Joint Strap KitThe 2670-10 is a 7260 series universal… Show more (+) 2670-10 7260 Universal Joint Strap KitThe 2670-10 is a 7260 series universal joint strap kit. It secures U-joint caps measuring 1.078″ in diameter, with a bolt center-to-center spacing of 1.5″ and bolt length of 0.625″. Thread specification is .250-28; fasteners torque to 15 ft-lb.SpecificationsPart Number: 2670-10Series: 7260Fits Cap Dia: 1.078″Center to Center: 1.5″Bolt Length: 0.625″Thread Dia: .250-28Bolt Torque: 15 ft-lbWhen installing the 2670-10, confirm U-joint cap diameter is 1.078″ before ordering. Mixing strap kits across series produces incorrect center-to-center geometry and unreliable cap retention. Torque fasteners to 15 ft-lb in a cross pattern to seat caps evenly against both yoke ears.The 7260 series defines the cap dimensions this strap is engineered for. The 1.5″ center-to-center dimension must correspond to the slot geometry in your yoke ears. Cross-reference the 2670-10 against your yoke specification to confirm compatibility before installation. Show less (-) | Bolt Length: 625 Bolt Torque: 15 ft-lb Center to Center: 1.5 Fits Cap Dia: 1.078 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | 2970-20 | 2970-20 7290 Universal Joint Strap KitThe 2970-20 is a 7290 series universal… Show more (+) 2970-20 7290 Universal Joint Strap KitThe 2970-20 is a 7290 series universal joint strap kit. It secures U-joint caps measuring 1.125″ in diameter, with a bolt center-to-center spacing of 1.53″ and bolt length of 0.59″. Thread specification is .250-28; fasteners torque to 15 ft-lb.SpecificationsPart Number: 2970-20Series: 7290Fits Cap Dia: 1.125″Center to Center: 1.53″Bolt Length: 0.59″Thread Dia: .250-28Bolt Torque: 15 ft-lbWhen installing the 2970-20, confirm U-joint cap diameter is 1.125″ before ordering. Mixing strap kits across series produces incorrect center-to-center geometry and unreliable cap retention. Torque fasteners to 15 ft-lb in a cross pattern to seat caps evenly against both yoke ears.The 7290 series defines the cap dimensions this strap is engineered for. The 1.53″ center-to-center dimension must correspond to the slot geometry in your yoke ears. Cross-reference the 2970-20 against your yoke specification to confirm compatibility before installation. Show less (-) | Bolt Length: 0.59 Bolt Torque: 15 ft-lb Center to Center: 1.53 Fits Cap Dia: 1.125 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | 3-70-28X | 3-70-28X 1350 / 1410 Universal Joint Strap KitThe 3-70-28X is a 1350… Show more (+) 3-70-28X 1350 / 1410 Universal Joint Strap KitThe 3-70-28X is a 1350 / 1410 series universal joint strap kit. It secures U-joint caps measuring 1.188″ in diameter, with a bolt center-to-center spacing of 1.806″ and bolt length of 0.75″. Thread specification is .312-24; fasteners torque to 32 ft-lb.SpecificationsPart Number: 3-70-28XSeries: 1350 / 1410Fits Cap Dia: 1.188″Center to Center: 1.806″Bolt Length: 0.75″Thread Dia: .312-24Bolt Torque: 32 ft-lbWhen installing the 3-70-28X, confirm U-joint cap diameter is 1.188″ before ordering. Mixing strap kits across series produces incorrect center-to-center geometry and unreliable cap retention. Torque fasteners to 32 ft-lb in a cross pattern to seat caps evenly against both yoke ears.The 1350 / 1410 series defines the cap dimensions this strap is engineered for. The 1.806″ center-to-center dimension must correspond to the slot geometry in your yoke ears. Cross-reference the 3-70-28X against your yoke specification to confirm compatibility before installation. Show less (-) | Bolt Length: 0.75 Bolt Torque: 32 ft-lb Center to Center: 1.806 Fits Cap Dia: 1.188 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | 3-70-38X | 3-70-38X 1480 / 1550 Universal Joint Strap KitThe 3-70-38X is a 1480… Show more (+) 3-70-38X 1480 / 1550 Universal Joint Strap KitThe 3-70-38X is a 1480 / 1550 series universal joint strap kit. It secures U-joint caps measuring 1.375″ in diameter, with a bolt center-to-center spacing of 2.13″ and bolt length of 0.75″. Thread specification is .375-24; fasteners torque to 52 ft-lb.SpecificationsPart Number: 3-70-38XSeries: 1480 / 1550Fits Cap Dia: 1.375″Center to Center: 2.13″Bolt Length: 0.75″Thread Dia: .375-24Bolt Torque: 52 ft-lbWhen installing the 3-70-38X, confirm U-joint cap diameter is 1.375″ before ordering. Mixing strap kits across series produces incorrect center-to-center geometry and unreliable cap retention. Torque fasteners to 52 ft-lb in a cross pattern to seat caps evenly against both yoke ears.The 1480 / 1550 series defines the cap dimensions this strap is engineered for. The 2.13″ center-to-center dimension must correspond to the slot geometry in your yoke ears. Cross-reference the 3-70-38X against your yoke specification to confirm compatibility before installation. Show less (-) | Bolt Length: 0.75 Bolt Torque: 52 ft-lb Center to Center: 2.13 Fits Cap Dia: 1.375 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | 3-70-58X | 3-70-58X Long Bolt Strap Kit – GM Applications, .312-24 Thread, 32 ft-lbThe… Show more (+) 3-70-58X Long Bolt Strap Kit – GM Applications, .312-24 Thread, 32 ft-lbThe 3-70-58X is a long bolt strap kit for GM driveline applications. Bolt length is 1.5″ with a total length including head of 1.820″. Thread diameter is .312-24, center-to-center spacing is 1.66″, and torque specification is 32 ft-lb.SpecificationsPart Number: 3-70-58XBolt Length: 1.5″Total Length with Head: 1.820″Thread Diameter: .312-24Center to Center: 1.66″Bolt Torque: 32 ft-lbApplication: GM applicationsWhen installing the 3-70-58X, torque the .312-24 bolts to 32 ft-lb. The longer 1.820″ total bolt length (including head) is the defining characteristic of this kit — standard strap bolts for the same thread size are shorter. This extended length is required by specific GM yoke designs where the strap saddle depth necessitates the additional bolt shank length.The 1.66″ center-to-center dimension of the 3-70-58X is very close to the 3570-20 (1.67″) used on 1350 series joints — confirm the exact GM application and required total bolt length before ordering to avoid substituting with the standard-length variant. Do not reuse strap bolts after removal. Show less (-) | Bolt Length: 1.5 Bolt Torque: 32 ft-lb Center to Center: 1.66 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | 350-70-18X | 350-70-18X UDS Strap Kit – SPL350 / 68765 Series, 2.559″ Cap, 188… Show more (+) 350-70-18X UDS Strap Kit – SPL350 / 68765 Series, 2.559″ Cap, 188 ft-lbThe 350-70-18X is a UDS strap kit for SPL350 and 68765 series universal joints (65x172mm). The kit fits a 2.559″ cap diameter. Bolt length is 1″, thread size is M14x1.25-6g, center-to-center spacing is 3.938″, and torque specification is 188 ft-lb.SpecificationsPart Number: 350-70-18XSeries: SPL350 / 68765Fits Cap Diameter: 2.559″Bolt Length: 1″Thread Diameter: M14x1.25-6g (metric)Center to Center: 3.938″Bolt Torque: 188 ft-lbWhen installing the 350-70-18X, torque the M14x1.25-6g bolts to 188 ft-lb with a calibrated torque wrench. Note the metric thread specification — M14x1.25-6g is a fine-pitch metric thread. The 3.938″ center-to-center span and 2.559″ cap diameter are consistent with the SPL350/68765 series heavy-duty commercial vehicle designation.The SPL350 series is one of the highest-torque driveline series in the SPL family. The metric M14x1.25-6g thread on the 350-70-18X is not interchangeable with the inch-thread strap bolts used in 1350 or 1480 series. Confirm the 2.559″ cap diameter against the installed joint and verify the M14 thread specification before ordering. Show less (-) | Bolt Length: 1 Bolt Torque: 188 ft-lb Center to Center: 3.938 Fits Cap Dia: 2.559 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | 3570-20 | 3570-20 Strap Kit – 1350 Series, 1.188″ Cap, 25-30 ft-lb, 1.67″ Center… Show more (+) 3570-20 Strap Kit – 1350 Series, 1.188″ Cap, 25-30 ft-lb, 1.67″ Center to CenterThe 3570-20 is a strap kit for 1350 series universal joints. The kit fits a 1.188″ cap diameter. Bolt length is 1.375″, thread diameter is .312-24, center-to-center spacing is 1.67″, and torque specification is 25-30 ft-lb.SpecificationsPart Number: 3570-20Series: 1350Fits Cap Diameter: 1.188″Bolt Length: 1.375″Thread Diameter: .312-24Center to Center: 1.67″Bolt Torque: 25-30 ft-lbWhen installing the 3570-20, torque the .312-24 bolts to 25-30 ft-lb. The 1350 series cap diameter is 1.188″ — verify this measurement on the installed joint caps before sourcing strap hardware. The 1.67″ center-to-center dimension is specific to the 1350 series yoke ear saddle configuration.The 1350 series is one of the most widely used heavy-duty truck driveline series in North America. The 3570-20 strap kit applies specifically to this series — do not use it on 1310 (1.063″ cap) or 1410 (1.375″ cap) series joints without verifying the cap diameter matches 1.188″. Do not reuse strap bolts after removal. Show less (-) | Bolt Length: 1.375 Bolt Torque: 25-30 ft-lb Center to Center: 1.67 Fits Cap Dia: 1.188 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | 4870-20 | 4870-20 Strap Kit – 1485 / 1555 Series, 1.375″ Cap, 25-30 ft-lbThe… Show more (+) 4870-20 Strap Kit – 1485 / 1555 Series, 1.375″ Cap, 25-30 ft-lbThe 4870-20 is a strap kit for 1485 and 1555 series universal joints. The kit fits a 1.375″ cap diameter. Bolt length is 1.5″, thread diameter is .312-24, center-to-center spacing is 1.925″, and torque specification is 25-30 ft-lb.SpecificationsPart Number: 4870-20Series: 1485 / 1555Fits Cap Diameter: 1.375″Bolt Length: 1.5″Thread Diameter: .312-24Center to Center: 1.925″Bolt Torque: 25-30 ft-lbWhen installing the 4870-20, torque the .312-24 bolts to 25-30 ft-lb. The longer 1.5″ bolt length distinguishes this kit from shorter strap kits used in other series — confirm this bolt length is correct for your specific yoke ear depth. The 1.925″ center-to-center span applies to both 1485 and 1555 series yokes that share the 1.375″ cap diameter.The 1485 and 1555 series share the same cap diameter and strap hardware. Confirm the 1.375″ cap measurement against the installed joint before sourcing strap kits. Do not reuse strap bolts after removal, as the torque-to-yield elongation alters clamping force on reuse. Show less (-) | Bolt Length: 1.5 Bolt Torque: 25-30 ft-lb Center to Center: 1.925 Fits Cap Dia: 1.375 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | 5-70-28X | 5-70-28X Strap Kit – 1610 Series, 1.875″ Cap, 52 ft-lb, 2.5″ Center… Show more (+) 5-70-28X Strap Kit – 1610 Series, 1.875″ Cap, 52 ft-lb, 2.5″ Center to CenterThe 5-70-28X is a strap kit for 1610 series universal joints. The kit fits a 1.875″ cap diameter. Bolt length is 0.75″, thread diameter is .375-24, center-to-center spacing is 2.5″, and torque specification is 52 ft-lb.SpecificationsPart Number: 5-70-28XSeries: 1610Fits Cap Diameter: 1.875″Bolt Length: 0.75″Thread Diameter: .375-24Center to Center: 2.5″Bolt Torque: 52 ft-lbWhen installing the 5-70-28X, torque the .375-24 bolts to 52 ft-lb. The 1610 series uses a 1.875″ cap — larger than the 1480 (1.375″) but smaller than the 1710 (1.938″). The 2.5″ center-to-center span on the 5-70-28X is specific to the 1610 series yoke ear saddle width; confirm this measurement before ordering.Do not substitute the 5-70-28X with strap kits from adjacent series — even if bolt diameter matches, the center-to-center dimension and cap fit will differ. Verify the 1610 series cap diameter (1.875″) against the installed joint caps before ordering strap hardware. Do not reuse strap bolts after removal. Show less (-) | Bolt Length: 0.75 Bolt Torque: 52 ft-lb Center to Center: 2.5 Fits Cap Dia: 1.875 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | 6.5-70-18X | 6.5-70-18X UDS Strap Kit – 1710 / 1760 / 1810 Series, 1.938″… Show more (+) 6.5-70-18X UDS Strap Kit – 1710 / 1760 / 1810 Series, 1.938″ Cap, 125 ft-lbThe 6.5-70-18X is a UDS strap kit for 1710, 1760, and 1810 series universal joints. The kit fits a 1.938″ cap diameter. Bolt length is 1″, thread diameter is .500-20, center-to-center spacing is 2.806″, and torque specification is 125 ft-lb.SpecificationsPart Number: 6.5-70-18XSeries: 1710 / 1760 / 1810Fits Cap Diameter: 1.938″Bolt Length: 1″Thread Diameter: .500-20Center to Center: 2.806″Bolt Torque: 125 ft-lbWhen installing the 6.5-70-18X, torque the .500-20 bolts to 125 ft-lb with a calibrated torque wrench. The larger .500-20 thread and 125 ft-lb torque specification distinguish this kit from smaller-series strap hardware. The 2.806″ center-to-center span must match the yoke ear saddle width for 1710, 1760, or 1810 series joints. Confirm the 1.938″ cap diameter against the installed U-joint before ordering.The 6.5-70-18X applies to three series (1710, 1760, 1810) that all share the 1.938″ cap diameter. Strap hardware is series-specific; substituting with smaller-series strap kits will result in incorrect torque distribution and potential cap retention failure. Do not reuse strap bolts after removal. Show less (-) | Bolt Length: 1 Bolt Torque: 125 ft-lb Center to Center: 2.806 Fits Cap Dia: 1.938 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | 90-70-28X | 90-70-28X UDS Strap Kit – SPL90 / SPL100 Series, 1.625″ Cap, 52… Show more (+) 90-70-28X UDS Strap Kit – SPL90 / SPL100 Series, 1.625″ Cap, 52 ft-lbThe 90-70-28X is a UDS strap kit for SPL90 and SPL100 series universal joints. The kit fits a 1.625″ cap diameter. Bolt length is 0.75″, thread diameter is .375-24, center-to-center spacing is 2.312″, and torque specification is 52 ft-lb.SpecificationsPart Number: 90-70-28XSeries: SPL90 / SPL100Fits Cap Diameter: 1.625″Bolt Length: 0.75″Thread Diameter: .375-24Center to Center: 2.312″Bolt Torque: 52 ft-lbWhen installing the 90-70-28X, torque the .375-24 bolts to 52 ft-lb. The 2.312″ center-to-center span must match the yoke ear saddle width for SPL90 or SPL100 series. Confirm the 1.625″ cap diameter against the installed U-joint caps before sourcing strap hardware — cap diameter determines which strap kit applies.The 90-70-28X and N90-70-28X share the same dimensional specification for SPL90/SPL100. Strap bolts for heavy-duty series joints like SPL90 and SPL100 must not be substituted with hardware from lower-torque series. Do not reuse strap bolts after removal. Show less (-) | Bolt Length: 0.75 Bolt Torque: 52 ft-lb Center to Center: 2.312 Fits Cap Dia: 1.625 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | N90-70-28X | N90-70-28X Strap Kit – SPL90 / SPL100 Series, 1.625″ Cap, 0.75″ Bolt… Show more (+) N90-70-28X Strap Kit – SPL90 / SPL100 Series, 1.625″ Cap, 0.75″ Bolt, 52 ft-lbThe N90-70-28X is a strap kit for SPL90 and SPL100 series universal joints. The kit fits a 1.625″ cap diameter. Bolt length is 0.75″, thread diameter is .375-24, center-to-center spacing is 2.312″, and torque specification is 52 ft-lb.SpecificationsPart Number: N90-70-28XSeries: SPL90 / SPL100Fits Cap Diameter: 1.625″Bolt Length: 0.75″Thread Diameter: .375-24Center to Center: 2.312″Bolt Torque: 52 ft-lbWhen installing the N90-70-28X, torque the .375-24 bolts to exactly 52 ft-lb using a calibrated torque wrench. The 2.312″ center-to-center dimension sets the strap plate span across the cap — confirm this matches the yoke ear spacing for the SPL90 or SPL100 application. The 1.625″ cap diameter must be verified against the installed U-joint before ordering strap hardware.The SPL90 and SPL100 series are high-torque designations above the 1610 and 1710 in capacity. Strap hardware for these series is not interchangeable with lower-series strap kits — confirm the cap diameter and center-to-center dimensions match your specific joint before installation. Do not reuse strap bolts after removal. Show less (-) | Bolt Length: 0.75 Bolt Torque: 52 ft-lb Center to Center: 2.312 Fits Cap Dia: 1.625 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | BTS8-125 | BTS8-125 UDS Ram 2500/3500 Serrated Flange Bolts – M8-1.25 Grade 12.9The BTS8-125… Show more (+) BTS8-125 UDS Ram 2500/3500 Serrated Flange Bolts – M8-1.25 Grade 12.9The BTS8-125 is a UDS serrated flange bolt kit for Ram 2500/3500 driveline applications. Thread size is M8-1.25 with a twelve-point (12PTS) head, grade 12.9. Bolt length is 1.625″ with 1.375″ of thread engagement under the head. The serrated flange face provides positive locking under vibration.SpecificationsPart Number: BTS8-125Brand: UDSThread Size: M8-1.25Bolt Type: 12-Point (12PTS)Grade: 12.9Bolt Length: 1.625″Length Under Head: 1.375″Application: Ram 2500/3500 serrated flangeWhen installing the BTS8-125 on a Ram 2500 or 3500, torque to the Ram OEM specification for M8-1.25 driveline flange fasteners. Grade 12.9 twelve-point hardware requires a matching twelve-point socket. The 1.375″ length under the head must clear the flange face without bottoming in the tapped receiver.The serrated flange of the BTS8-125 bites into the yoke face to resist rotational loosening — do not reuse serrated flange bolts after removal, as the serrations deform on first torque. Source new fasteners for each installation. Show less (-) | Bolt Length: 1.625 Bolt Type: 12PTS Brand: UDS Grade: 12.9 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | BTSM10-125 | BTSM10-125 UDS M10-1.5 Grade 12.9 Twelve-Point Bolt Set – Dodge, BMW, CadillacThe… Show more (+) BTSM10-125 UDS M10-1.5 Grade 12.9 Twelve-Point Bolt Set – Dodge, BMW, CadillacThe BTSM10-125 is a UDS set of 8 grade 12.9 twelve-point (12PTS) bolts with M10-1.5 thread. Bolt length is 1.750″ with 1.375″ of thread engagement under the head. This kit is specified for Dodge Hellcat 2015+, Dodge Challenger SRT Pack, BMW, Chrysler 300, and Cadillac CTS-V with 6L90 and ZFHP90 transmissions (2015-2019).SpecificationsPart Number: BTSM10-125Brand: UDSThread Size: M10-1.5Bolt Type: 12-Point (12PTS)Grade: 12.9Bolt Length: 1.750″Length Under Head: 1.375″Quantity: Set of 8Application: Dodge Hellcat 2015+, Dodge Challenger SRT Pack, BMW, Chrysler 300, Cadillac CTS-V 6L90 / ZFHP90 (2015-2019)When installing the BTSM10-125 set, use a twelve-point socket and torque to the OEM specification for M10-1.5 driveline fasteners on each specific platform. Grade 12.9 hardware must not be substituted with lower-grade fasteners. Verify that the 1.375″ thread engagement under the head does not cause bottoming in the flange tapped holes.This set covers the full complement of 8 bolts for a single driveline flange joint on compatible Dodge, Chrysler, BMW, and Cadillac applications. Confirm transmission model (6L90 or ZFHP90) for the CTS-V before ordering. Show less (-) | Bolt Length: 1.750 Bolt Type: 12PTS Brand: UDS Grade: 12.9 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | BTS8-125 | When rebuilding or servicing a Series driveline shaft, every component matters. The… Show more (+) When rebuilding or servicing a Series driveline shaft, every component matters. The 80992U from UDS supplies the correct drivetrain component geometry for the specified application, maintaining the dimensional chain that keeps the assembly balanced and the U-joints properly retained. See notes: Ram 25000/3500 serrated flange bolts.Part Specifications — 80992USpecificationValuePart Number80992UBrandUDSNotesRam 25000/3500 serrated flange boltsThread sizeM12-1.75Bolt type12PTSGrade12.9Bolt length1.5Length under head1NotesRam 25000/3500 serrated flange boltsSeries FitmentThe 80992U is designed for direct use in Series driveshaft assemblies. Cross-reference the part number against the vehicle or equipment service manual to confirm correct application before installation. Factory cross-reference note: Ram 25000/3500 serrated flange bolts.Verify series designation matches both ends of the driveshaft assemblyInspect mating components for wear before installing new drivetrain componentReplace in matched sets where applicable to maintain balanced service lifeAssembly GuidanceInstall the 80992U per the manufacturer service manual procedure. Ensure mating surfaces are clean and free of corrosion or burrs before assembly. Use the correct installation tooling to avoid damaging precision-ground surfaces. Torque all fasteners to specification.Do not reuse snap rings or retaining clips — always install new hardwareInspect bearing bores and cross ears for wear before assemblyConfirm correct phasing on multi-joint shafts after any yoke or end component replacementAvailability & SupportUniversal Driveshafts stocks 80992U and hundreds of related Series driveshaft components for same-day order processing. Our technical team is available to assist with part identification, series verification, and complete driveshaft assembly solutions. Show less (-) | Bolt Length: 1.5 Bolt Type: 12PTS Brand: UDS Grade: 12.9 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | 2718-628 | The 2718-628U is a UDS boot kit for BMW boot for OE… Show more (+) The 2718-628U is a UDS boot kit for BMW boot for OE 35mm bearings. CV joint boots are the first line of defense for your constant-velocity joint — once a boot tears or cracks, grease escapes and contaminants enter, leading to rapid CV joint wear. Replacing the boot at the first sign of damage is always more cost-effective than replacing the entire CV joint assembly.Why Boot Condition MattersThe CV joint boot seals the bearing and grease pack inside the joint. A torn boot allows the grease to fling out during operation while road grit and moisture are drawn in. Driving as little as a few hundred miles on a torn boot can destroy a CV joint that would otherwise last the life of the vehicle. The 2718-628U provides the correct-fitting replacement boot to restore the seal and extend joint life.Designed for: BMW boot for OE 35mm bearingsRestores grease seal integrityPrevents contamination entry into CV jointIncludes clamps and grease pack (verify kit contents)Specifications and ContentsSpecificationValueApplicationBMW boot for OE 35mm bearingsBrandUDSInstallation OverviewBoot replacement requires disassembly of the outer CV joint from the axle shaft. After removing the old boot, clean the joint thoroughly, inspect the balls and races for pitting or corrosion, and pack with fresh CV grease before installing the new boot. Seat both clamps firmly — the inner clamp at the joint housing and the outer clamp at the shaft. Uneven clamping allows the boot to walk off the joint under articulation.If you discover joint wear during boot replacement, replace the entire joint — a worn joint inside a new boot will generate noise and vibration within a short period. Universal Driveshafts stocks complete CV joint assemblies for most applications.2718-628U is a UDS product. Contact Universal Driveshafts for additional fitment information or to order a complete CV joint assembly. Show less (-) | Brand: UDS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | 2716-311 | The 2716-311U is a UDS press-on dust cap designed for BMW applications… Show more (+) The 2716-311U is a UDS press-on dust cap designed for BMW applications — Newer BMW apps, used with 3133-311, 0.20″ width. Dust caps protect the splined bore of driveshaft components from contamination, corrosion, and mechanical damage during service and storage. With a 1.500" outer diameter and 1.43-31 spline size, this cap presses firmly onto the hub without adhesive and seats flush with the end face.Design and FunctionA press-on dust cap performs a simple but critical function: it keeps debris, moisture, and oil out of the spline bore. Without a cap, corrosion inside the spline can lock the yoke to the output shaft, requiring destructive removal. The 2716-311U seats securely through a press fit and can be removed with a slide hammer or cap puller during future service without damaging the underlying splines.Type: Press-on (no threads required)Outer diameter: 1.500"Spline compatibility: 1.43-31Application: Newer BMW apps, used with 3133-311, 0.20″ widthSpecificationsSpecificationValueApplication SeriesBMWOuter Diameter1.500"Spline Size1.43-31NotesNewer BMW apps, used with 3133-311, 0.20″ widthBrandUDSInstallation and UsagePress the cap squarely onto the hub using a flat-faced driver or socket of appropriate diameter. Do not tilt the cap during installation — an uneven press fit allows moisture ingress at the partial-contact edge. The cap should seat flush with or slightly below the end face of the hub. Verify that the cap is fully seated by pressing around the perimeter after initial installation.Replace this cap whenever the driveshaft is disassembled for service. Reusing a deformed or partially corroded cap defeats its purpose. The 2716-311U is sold individually — order multiples for fleet maintenance or rebuild kits.The 2716-311U is a UDS product stocked at Universal Driveshafts. Available individually or in bulk for shop use. Show less (-) | Brand: UDS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | DUST CAP KIT D3G 1350/1410 Series Splined Dust Cap KitThe DUST CAP… Show more (+) DUST CAP KIT D3G 1350/1410 Series Splined Dust Cap KitThe DUST CAP KIT D3G is a splined dust cap kit rated for both 1350 and 1410 series driveshaft slip assemblies. It seals the spline bore entry on slip yokes and stub shafts against road contamination and moisture intrusion. The inside diameter is 1.779″ (R-profile) and the dual-lip seal OD measures 1.766″ outer / 1.375″ inner. The 16-spline engagement count applies to both series fitments covered by this kit.The D3G differs from the D3K by its seal OD specification: where the D3K uses a 1.750/1.500 stepped seal face, the D3G uses a 1.766/1.375 profile. This wider spread between the two seal diameters provides a longer lip contact path on the housing register, which is why the D3G covers two series — the 1350 and 1410 assemblies share a common housing register in certain application families. The 1.779-R inside diameter designates a ribbed bore contoured to fit over the spline crests; attempting to fit this cap over a smooth-bore journal or a spline with a different count will result in an incomplete seal or a cap that will not seat at full depth. Confirm the housing bore can accommodate the 1.766″ outer seal lip before installation.SpecificationsPart Number: DUST CAP KIT D3GSeries: 1350 / 1410Type: SplinedInside Diameter: 1.779-RSeal OD: 1.766 / 1.375Spline Count: 16Fitment & Installation NotesBefore ordering the DUST CAP KIT D3G, confirm the spline count on your slip yoke or stub shaft is 16. Cross-check the housing bore register against the 1.766″ outer lip diameter — this is a tighter outer diameter than some generic caps and the housing bore must be clean and within specification to achieve a proper seal. The dual-series compatibility (1350 and 1410) means verify which series your driveshaft runs before assuming interchangeability in all dimensions.Both 1350 and 1410 series applications are found in 3/4-ton to 1-ton truck and SUV platforms. The 1350 series handles light-to-medium duty cycles; the 1410 series steps up torque capacity for full-size HD applications. A properly seated dust cap on either series is the primary barrier preventing spline corrosion — corroded splines lock the slip joint and transfer shock loads directly to the U-joint and yoke rather than allowing the shaft to telescope under suspension cycling. Repack the spline bore with chassis grease before fitting the DUST CAP KIT D3G to ensure long service life.Check the existing cap for cracking or lip separation at each driveshaft service interval. UV degradation and heat cycling cause rubber seal lips to harden and lose contact pressure over time. Explore related Slip Yoke components including 1350 and 1410 series slip yokes that use this dust cap configuration. Show less (-) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
