End Yokes
More categories:
Filters Sort results
Reset Apply
Pic | Add | Part # | Series | Cj to End | Hub Dia | Splines Count | Splines Dia | Style | Through hole | Brand | Notes |
|---|---|---|---|---|---|---|---|---|---|---|---|
 | 1810 | 5.250" | 3.000" | 44 | 2.274 | BP | 2.500" | UDS | 1810BP | ||
| | 7260 | 3.250" | 1.450 | 24/26 | 1.100" | ISR | 1.300" | UDS | FITS: MAZDA - MITSUBISHI - KIA | ||
| | 1350 | 3.100" | 1.85 | 24 | 1.250" | UB | 1.500" | FITS JEEP WRANGLER JK DANA 30 AND DANA 44 FRONT END | |||
| | 1310 | 3.000" | 1.85 | 24 | 1.25 | UB | 1.5 | JEEP JK - FRON PINION | |||
| | SPL90 | 4.375" | 3.000" | 32 | 2.114 | BS | 2.250" | ||||
| | SPL90 | 4.625 | 3.000" | 39 | 2.024 | BS | 2.312 | ||||
| | SPL90 | 4.062 | 2.190" | 34 | 1.790" | BS | 2.250" | ||||
| | 1810 | 5.652 | 0.000" | 54 | 2.794 | HR | 2.750" | ||||
| | 1810 | 5.652 | 0.000" | 54 | 2.794 | BP | 2.750" | HUB DIAMETER NOT GROUND | |||
| | 1810 | 5.500" | 2.875 | 46 | 2.390" | HR | 2.750" | HUB DIAMETER NOT GROUND | |||
| | 1810 | 5.500" | 2.875 | 16 | 2.350" | HR | 2.750" | COUPLING SHAFT YOKE | |||
| | 1810 | 5.500" | 2.875 | 16 | 2.350" | BP | 2.750" | COUPLING SHAFT YOKE | |||
| | 1760 | 5.500" | 2.875 | 46 | 2.39 | HR | 2.750" | COUPLING SHAFT YOKE | |||
| | 1760 | 5.250" | 3.000" | 44 | 2.274 | HR | 2.500" | ||||
| | 1760 | 5.625 | 0.000" | 54 | 2.794 | HR | 2.750" | HUB DIAMETER NOT GROUND | |||
| | 1760 | 5.500" | 2.875 | 16 | 2.350" | HR | 2.750" | ||||
| | 1760 | 5.500" | 2.875 | 16 | 2.350" | BP | 2.750" | ||||
| | 1710 | 5.156 | 3.000" | 39 | 2.024 | HR | 2.312 | ||||
| | 1710 | 4.938 | 2.875 | 46 | 2.390" | HR | 2.750" | ||||
| | 1710 | 5.391 | 3.250" | 46 | 2.390" | BP | 2.328 |
Category Information
End yokes are the terminal components of a driveshaft assembly — the pieces that connect each end of the shaft to the drivetrain components on either side of it. Their dimensional accuracy determines how true the shaft runs, how long the U-joints last, and whether the completed assembly balances correctly. A yoke with sloppy U-joint bores allows the bearing caps to move under load, wearing both the yoke and the bearing surfaces in a self-reinforcing cycle of degradation. We carry end yokes across all standard U-joint series, in the configurations used across automotive, truck, and industrial driveshaft applications. Each one is machined to the bore diameter and snap ring groove specifications that ensure a proper, lasting U-joint fit.
