TRANSMISSION-YOKES
Filters Sort results
Reset Apply
Image | Add | Part number | Series | Splines count & Dia | Center U Joint to End | Counter Bore Dia | Hub Dia | Brand | Splines count | Splines dia | C l to end | Notes |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
 | 1330 | 27/28 X 1.220 | 6.630 | 0 | 1.600 | C4 | ||||||
 | 1350 | 26/27 X 1.176 | 6.900 | 385 | 1.500 | Forged yoke w/ induction heat treated hub, | ||||||
 | 1330 | 27/28 X 1.220 | 7.860 | 0 | 1.500 | C4 | ||||||
 | 1310 | 26 / 27 X 1.176 | 5.750 | 0 | 1.500 | High angle version used on Jeep Wranglers. Same as 2-3-12411X | ||||||
 | 1350 | 27/28 X 1.220 | 6.625 | 0 | 1.500 | |||||||
 | 1310 | 26 / 27 X 1.176 | 8.000 | 0 | 1.500 | Used in race car applications with T350 trans, extra long travel slip. | ||||||
 | 1350 | 26/27 X 1.176 | 6.900 | 385 | 1.500 | Forged yoke w/ induction heat treated hub, | ||||||
 | 1330 | 29/30 X 1.284 | 8.031 | 1.500 | 1.681 | Chrysler 727/A518/46RH/46RE/47RE trans | ||||||
 | 1330 | 27/28 X 1.220 | 5.906 | 0 | 1.500 | C4 | ||||||
 | 1251 | 24/26 X 1.115 | 6.000 | 1.125 | 1.375 | Nissan | ||||||
 | 7290 | 29/30 X 1.312 | 8.031 | 0 | 1.681 | Full Spline. | ||||||
 | 1350 | 31/32 X 1.378 | 5.500 | 0.5 | 1.886 | Same as Dana 3-3-2431X | ||||||
 | 1410 | 33/34 X 1.551 | 8.110 | 1.564 | 2.086 | Nickel Plated | ||||||
 | 1251 | 24/26 X 1.115 | 6.000 | 1.250 | 1.495 | Nissan | ||||||
 | 1310 | 10 x 1.375 | 3.375 | 1.000 | 2.125 | Used in boat applications, Fits onto standard jet drive | ||||||
 | 7290 | 29/30 X 1.312 | 8.031 | 1.455 | 1.681 | DET#2781932 Chrysler 727/A518/46RH/46RE/47RE trans | ||||||
 | 1310 | 21 X 1.100 | 6.000 | 0 | 1.495 | Toyota Truck High Angle | ||||||
 | 1410 | 33/34 X 1.551 | 8.110 | 0 | 2.086 | Nickel Plated | ||||||
 | 1480 | 32/34 X 1.750 | 9.551 | 0 | 2.300 | Dodge trans slip yoke | ||||||
 | 3 R | 31/32 X 1.390 | 1.700 | Hub has rough finish, not polished for use with seal |
