Center Support Bearing
More categories:
Filters Sort results
Reset Apply
Image | Add | Part Number | Bearing id | Ctr to Ctr of Mount Holes | Center bearing To Base | Application | Notes |
|---|---|---|---|---|---|---|---|
 | 1.181 | 0 | 0 | Numerous | Single Row Deep Groove Radial Ball Bearing, 30 mm Bore ID, 55 mm OD, 13 mm Width, Double Sealed | ||
 | 1.771 | 7.620 | 2.690 | 1550,1610 | |||
 | 1.968 | 7.620 | 2.780 | 1710 | |||
 | 1.378 | 6.625 | 2.250 | 1310, 1330, 1350 | Common CB w/rubber backing / double bracket housing | ||
 | 1.574 | 6.625 | 2.250 | 1350, 1410 | |||
 | 1.378 | 35mm (ID) x 55mm x 13mm Ball Bearing | |||||
 | 1.181 | 6.750 | 1.750 | GM | 08-10 CTS | ||
 | 1.181 | 6.875 | 2.625 | GM | 03-07 Cadillac CTS | ||
 | 1.181 | 4.625 | 375 | MERCEDES | #1 stamped on mounting tab, legs have slight angle on them to center of bearing (not flat) | ||
 | 1.378 | 6.625 | 2.250 | 1310, 1330, 1350 | Ford, Chevy w/rubber backing / double bracket housing | ||
 | 1.181 | 7.375 | 3.000 | MULTIPLE | Dodge / Chrysler, CB comes complete w/bearing | ||
 | 1.181 | 4.750 | 800 | MERCEDES | 300SD, 380SE, 380SEC, 380SEL, 500SEC, 500SEL ⋅ CB comes complete w/bearing | ||
 | 1.181 | 5.250 | 1.750 | BMW | |||
 | 1.181 | 6.000 | 0 | TOYOTA | Pickup 4X4 (89-95) | ||
 | 1.181 | 5.875 | 500 | TOYOTA | 2x4 Toyota Truck | ||
 | 1.181 | 0 | 0 | MULTIPLE | Isuzu Honda, Rubber and bearing only | ||
 | 1.181 | 5.125 | 2.125 | BMW | |||
 | 1.181 | 6.300 | 1.750 | BMW | |||
 | 1.181 | 5.875 | 500 | TOYOTA | 4x4 Toyota Truck (Notice seals around bearing) | ||
 | 1.378 | 1350 | 3580-34 bearing with dust caps, might fit other applications | ||||
 | 1.574 | 3.380 | 3.250 | DODGE | Same as 211848-1X. Dodge 4x4, Mounting bracket is threaded ( 7/16-14) | ||
 | 1.181 | 5.500 | 2.500 | BMW | |||
 | 1.574 | 6.625 | 2.250 | 1410 | M10-1.5 Studs in bracket | ||
| 1.574 | 3.380 | 3.250 | DODGE | Same as 211963-1X. Dodge 4x4, Mounting bracket is threaded (M10-1.5) | ||
 | 1.181 | 4.875 | 1.000 | BMW | |||
 | 2.362 | REPLACES 5003323 ,210987-1X , 212066-1X, 212129-1X | |||||
 | 1.574 | 6.620 | 2.524 | FORD | FLAT BOTTOM ON BRACKET. ( SITS FLAT ) Used on F250 & F350 applications ⋅ Heavy Duty Version | ||
 | 1.181 | 7.125 | 3.300 | GM | Acadia, Traverse, Enclave | ||
 | 1.574 | 6.665 | 2.250 | Nissan | rubber cushion w/o canister | ||
 | 1.574 | 6.181 | 2.125 | Lincoln Navigator | without spacers | ||
 | 1.574 | 6.181 | 2.382 | Lincoln Navigator | with spacers | ||
 | 1.181 | 5.125 | 2.375 | Dodge, Chrysler | Caravan, Town & Country 02-04 | ||
 | 1.378 | 6.625 | 2.250 | GM | Chevrolet GMC, Square type used with double CV, 6.40mm X 14.30mm mounting bolts, square steel bracket | ||
 | 1.181 | 5.875 | 1.950 | 1210, 1310 | FORD | ||
 | 1.181 | 5.750 | TOYOTA | grease the bearing before installing ⋅ Pickup 4X2 (79-83) | |||
 | 1.181 | 6.300 | 1.650 | BMW | measured from top of bracket to center line | ||
 | 1.181 | 6.300 | 60 | BMW | Aluminum housing .. | ||
 | 1.181 | 6.250 | 375 | MERCEDES | 2mm mounting tab thickness | ||
 | 1.181 | 5.500 | 625 | CB .625 BELOW CL SLANTED. | |||
 | 1.181 | 6.300 | 500 | BMW | |||
 | 1.181 | 6.250 | 1.750 | BMW | |||
 | 1.181 | 0 | 2.000 | TOYOTA | Rubber and bearing only, use old bracket | ||
 | 1.574 | 6.625 | 2.250 | 1350 | FORD | ||
 | 1.574 | 6.625 | 2.250 | DODGE | Dodge Square with slotted holes, Square like 40026573 | ||
 | 1.181 | 6.000 | 0 | TOYOTA | Pickup 4X2 (84-95) | ||
 | 1.181 | 5.125 | 1.750 | BMW | |||
| 1.181 | 4.950 | 1.000 | MERCEDES | 4 cyl (68-77) 200, 220, 230 ⋅ Housing and rubber only. 6006LLU (30mm id) bearing sold separately | ||
 | 985 | 4.625 | 0 | MERCEDES | Housing and Rubber only . 6005LLU Sold Separately ..Bearing ID .985" - OD 1.847" | ||
 | 1.574 | 6.620 | 2.748 | FORD | Aluminum flat bottom bracket. Used on F250 & F350 applications ⋅ Heavy Duty Version | ||
 | 1.378 | 6.625 | 2.375 | GM | Chevrolet GMC, Enclosed type bracket w/ studs (M10-1.5) | ||
 | 1.378 | 6.250 | 250 | BMW | |||
 | 1.181 | 6.890 | 1.440 | MULTIPLE | Mazda Ford / Tribute/Escape/Mariner | ||
 | 985 | 4.300 | 750 | MERCEDES | Housing and Rubber only . 6005LLU Sold Separately ..Bearing ID .985" - OD 1.847" | ||
 | 1.378 | 5.125 | 2.125 | BMW | |||
 | 1.378 | 0 | 2.180 | Nissan | Infiniti/ Nissan. Like 1280-30 but with larger bearing ID / Bracket not included. comes with new nut washer/spacer | ||
 | 1.181 | 6.250 | 1.750 | BMW | |||
 | 1.181 | 6.300 | Range Rover (06-12) | ||||
 | 1.181 | 7.125 | 875 | KIA | 493002E000, 493002E050 | ||
 | 1.181 | 6.300 | 1.625 | BMW | |||
 | 1.181 | 6.375 | 0 | TOYOTA | Toyota Corolla (77-83) | ||
 | 1.378 | 7.625 | 2.750 | 1350 | Sprinter, Used in 1350 series new shaft conversions | ||
 | 1.260 | 6.791 | 0 | Toyota Truck 16+ | |||
 | 1.378 | 6.300 | 1.625 | BMW | |||
 | 1.181 | 6.375 | 0 | MULTIPLE | Mitsubishi Dodge | ||
 | 1.181 | 3.181 | 0 | TOYOTA | Pickup 4X2 (73-75) | ||
 | 1.181 | 4.625 | 1.000 | VOLVO, FORD | V70, V80, S60, XC60, FORD ESCAPE 2013-16, M8-1.25 | ||
 | 1.181 | 5.250 | 2.000 | BMW | |||
 | 1.181 | 5.875 | 1.000 | TOYOTA | |||
 | 1.574 | 0 | 0 | MULTIPLE | 40x62x15 Bearing only. Fits in housings of 3R80-10, 3R80-25, 3R80-30 and 3R80-35 | ||
 | 1.181 | 6.811 | 0 | HYUNDAI GENESIS | |||
 | 1.181 | 0 | Mitsubishi Outlander | Front cb | |||
 | 1.181 | 0 | 0 | merkur | Rubber and bearing only | ||
 | 1.181 | 6.400 | 0 | TOYOTA | Cressida (78-5/85) | ||
 | 1.181 | 5.875 | 0 | TOYOTA | Celica (78-81) Corona (78-81) | ||
 | 1.181 | 0 | Mitsubishi Endeavor | Rear CB on 3pc shaft | |||
 | 1.378 | 5.681 | 91 | BMW | |||
 | 1.181 | 0 | Mitsubishi Endeavor | Front CB on 3pc shaft | |||
 | 985 | 6.625 | 2.125 | MAZDA | Mazda GLC (77-80) CB mounts at an offset . one bracket sits below .375" and the opposite side mounts 2.125" | ||
 | 985 | 3.000 | 2.437 | VOLVO | |||
 | 1.181 | 11.125 | 03-06 Chrysler Pacifica | Front CB on 3pc shaft | |||
 | 1.181 | 11.125 | 07-08 Chrysler Pacifica | Front CB on 3pc shaft | |||
 | 1.181 | 0 | 2.375 | Nissan | 620 Pickup (73-79) | ||
 | 1.181 | 5.906 | 571 | 03-08 Chrysler Pacifica | Rear CB on 3pc shaft | ||
 | 1.181 | 6.000 | 2.170 | Nissan, Infiniti | Double metal rings surrounding the rubber and bearing. Comes with nut and washer/spacer | ||
 | 1.181 | 6.000 | 2.500 | Nissan | Nissan / Infiniti / Frontier 4X4 (98-03) Hardbody 4X4 (86-97) Pathfinder 4X4 (87-03) Xterra 4X4 (00-03) QX4 4X4 (00-03) | ||
 | 1.378 | 6.250 | 1.750 | BMW/ Land Rover | |||
 | 1.181 | 6.690 | 3.898 | 99-06 VITARA, TRACKER | |||
 | 1.181 | 6.690 | 3.500 | 01-06 SUZUKI XL-7 | |||
 | 1.574 | 6.625 | 2.250 | 1350 | Ford F-150 | ||
 | 1.378 | 6.300 | 500 | BMW | |||
 | 1.772 | 3.181 | 2.375 | VOLVO | Must check bearing ID 1.772 / 740/760 (83-92) 940 (91-95) 960 (92-97) | ||
 | 1.574 | 0 | 2.250 | 1310, 1330, 1350 | Urethane insert for standard 1.25" bracket w/ 1.574" bearing ID. ( No bracket or bearing included) | ||
 | 1.260 | 5.875 | 1.940 | 1210 | Ford, Ranger (86-89) | ||
 | 1.574 | 8.228 | 1.500 | FORD | Ford F-250/F-350 | ||
 | 985 | 6.625 | 1.000 | ACURA | |||
 | 1.181 | 4.875 | 500 | MERCEDES | Housing and rubber only. 6006LLU Bearing sold separately | ||
 | 1.181 | 6.890 | 2.717 | Subaru BR-Z, Scion FR-S, Toyota 86 | centerline and center to center measured with legs parallel to floor, shorter side centerline 0.960" | ||
 | 985 | 5.875 | 2.500 | MULTIPLE | Mazda Ford B1600/Courier (72-81) | ||
 | 1.102 | 6.625 | 1.000 | MAZDA | MAZDA | ||
| 1.181 | MERCEDES | W/O bearing | ||||
 | 1.181 | 6.375 | 500 | CHRYSLER | Jeep Grand Cherokee 2012+ | ||
 | 1.181 | 6.375 | Durango, Grand Cherokee | Similar to 3180-27 but with spacers on bracket | |||
 | 985 | 6.875 | 750 | ACURA,HONDA | |||
 | 1.181 | 7.000 | 750 | Subaru | Cannot be used on OE shaft. New shafts only. Has tab on passenger side of bracket | ||
 | 985 | 6.693 | 347 | ACURA,HONDA | ACURA MADX - HONDA PILOT | ||
 | 1.181 | 7.000 | 1.791 | Mazda CX-5 (13-17) | |||
 | 1.260 | 6.750 | 750 | KIA | 07+ Kia Sorento | ||
 | 1.181 | 4.350 | 1.750 | TOYOTA | Pickup 4X2 (76-78) | ||
 | 1.181 | 8.125 | 2.500 | MERCEDES | Housing and rubber only. 6006LLU Bearing sold separately, 4.55mm #3 shim | ||
 | 1.181 | 5.110 | 2.087 | Land Rover LR3 & LR4 | |||
 | 1.181 | 5.110 | 2.485 | Rang Rover Sport | |||
 | 1.181 | 6.625 | 2.500 | MULTIPLE | Jaguar S-Type / Lincoln LS | ||
 | 985 | 6.375 | 500 | HONDA | CRV 2002 TO 2006 | ||
 | 985 | 6.625 | 1.500 | HONDA | CRV 2007 TO 2011 | ||
 | 985 | 6.875 | 500 | HONDA | CRV 1997 TO 2001 | ||
 | 1.378 | 7.625 | 2.750 | DODGE ⋅ MERCEDES | Mercedes Benz Sprinter (906) 2006-2018 Dodge Sprinter 2500/3500 2007-2018 | ||
 | 1.181 | 3.625 | 4.000 | 1330 | Colorado, Canyon, Isuzu I-280, I-290, I-370, M12-1.75 threaded | ||
 | 1.181 | 7.500 | 2.625 | GM | Chevy Equinox / Pontiac Torrent / GMC Terrain | ||
| 2.326 | 8.622 | 1710 - 1760 - 1810 | ||||
 | 1.181 | 7.500 | 1.000 | GM | Vue 02-07, Equinox 05-09, Torrent 06-09 | ||
 | 1.181 | 5.875 | 2.125 | Nissan | 300ZX (90-96) | ||
 | 1.181 | 8.000 | 0 | Dodge Journey | |||
 | 1.181 | 6.000 | INFINITI Q50 (AWD) | 15 mm spacer | |||
 | 1.181 | 6.000 | INFINITI Q50, Q60 | 3 mm spacer | |||
 | 1.181 | 6.000 | 1.125 | Infiniti | Q45 (90-96) | ||
 | 1.181 | 6.000 | 197 | INFINITI Q50, Q60, Q70, M37, M56 | 11 mm spacer | ||
 | 1.378 | 6.300 | 1.650 | BMW | BMW, Aluminum housing, measured from top of bracket to center | ||
 | 1.181 | 3.625 | 3.250 | MULTIPLE | Isuzu Honda | ||
 | 1.181 | 3.675 | 2.125 | VOLVO | Cannot be used on OE shaft. New shafts only / XC70 (04-07) XC90 (03-05) | ||
 | 1.181 | 6.625 | 800 | Acura TL 2009-2014 | |||
 | 1.181 | 5.875 | 625 | TOYOTA | Toyota Cressida (89-92) | ||
 | 1.181 | 5.875 | 0 | Cadillac CT6 | bearing centerline zero | ||
 | 1.181 | 7.000 | 250 | Subaru | 4 degree mounting tabs ⋅ Subaru Forester | ||
 | 1.181 | 6.750 | 1.375 | FORD | Ford Explorer 07+ | ||
 | 985 | 6.625 | 0 | TOYOTA | Toyota Rav4 2006-2011 | ||
 | 985 | 6.875 | 750 | Subaru | CB mounts at an offset . one bracket sits below .75" and the opposite side mounts even. Comes with grommets | ||
 | 1.181 | 6.250 | 375 | Mitsubishi | |||
 | 1.181 | 7.250 | 1.250 | MULTIPLE | Mitsubishi Dodge, CB mounts at an offset | ||
 | 1.102 | 6.750 | 750 | KIA | Kia Sorento 2WD (03-06) | ||
 | 1.378 | 6.875 | 1.875 | BMW | Bearing has offset | ||
 | 1.574 | 6.625 | 2.337 | DODGE | Dodge/ 11 x 27 mount slots / Supersedes 40041712 | ||
 | 1.181 | 6.625 | 2.125 | Subaru | Cannot be used on OE shaft. Has tab welded to passenger side of bracket . Same as 9980-52 but with the 6.625" bolt to bolt spacing. | ||
 | 1.181 | 7.750 | 0 | Mitsubishi Lancer | Rear CB on 3pc shaft | ||
 | 1.181 | 5.625 | 3.750 | BMW | Aluminum housing w/two threaded holes 1" to center below mounting surface. | ||
 | 1.181 | 7.750 | 0 | Mitsubishi Lancer | Front CB on 3pc shaft | ||
 | 1.181 | 8.750 | 1.250 | Ford Edge & Lincoln MKX | |||
 | 1.181 | 2.965 | 2.750 | MULTIPLE | Cayenne 03-10, Touareg 04-08, CV Boot 2518-651 will need to be replaced with this bearing. | ||
 | 1.181 | 7.250 | 0 | MULTIPLE | Toyota Matrix/Pontiac Vibe 2003-2006 | ||
 | 1.181 | 6.625 | 0 | MULTIPLE | Toyota Matrix/Pontiac Vibe 2009-2013 | ||
 | 1.181 | 7.000 | 0 | TOYOTA | Rav 4 AWD (01-05) | ||
 | 1.181 | 6.875 | 0 | MULTIPLE | Toyota Highlander (01-06) Lexus RX300/330 (99-06) | ||
 | 1.181 | 6.750 | 2.125 | Subaru | CB mounts at an offset . one bracket sits below 2.125" and the opposite side mounts 1.0". Comes with grommets | ||
 | 1.181 | 6.750 | 1.500 | Subaru | CB mounts at an offset . one bracket sits below 1.50" and the opposite side mounts .75" | ||
 | 1.181 | 5.800 | 0 | Subaru | Mounting brackets are centered angled downward | ||
 | 1.181 | 6.875 | 750 | Subaru | CB mounts at an offset . one bracket sits below .75" and the opposite side mounts even. Comes with grommets | ||
 | 1.181 | 6.625 | 750 | Subaru | Comes with grommets ⋅ Mounting brackets are offset ⋅ One is even and the opposite is .75" offset | ||
 | 1.181 | 6.625 | 750 | Subaru | CB mounts at an offset . one bracket sits below .75" and the opposite side mounts even | ||
 | 1.181 | 6.750 | 1.750 | Subaru | CB mounts at an offset . one bracket sits below 1.75" and the opposite side mounts .75" | ||
 | 1.181 | 6.750 | 1.750 | Subaru | CB mounts at an offset . one bracket sits below 1.75" and the opposite side mounts .75" | ||
 | 1.181 | 6.750 | 750 | Subaru | CB mounts at an offset . one bracket sits below .75" and the opposite side mounts even | ||
 | 1.181 | 7.000 | 750 | Subaru | Cannot be used on OE shaft. New shafts only. Has tab on passenger side of bracket | ||
 | 1.181 | 7.000 | 1.125 | Subaru | Cannot be used on OE shaft. New shafts only. | ||
 | 1.181 | 7.000 | 1.000 | Subaru | |||
 | 1.102 | 6.625 | 1.500 | MULTIPLE | Mazda Kia. CB mounts at an offset .50" AND 1.50" opposite bracket.. | ||
 | 1.102 | 7.375 | 0 | MAZDA | CB mounts at an offset . one bracket sits below 2.25" and the opposite side mounts 1.25" below | ||
 | 1.181 | 3.625 | 3.125 | Isuzu | Isuzu, M12-1.25 threaded | ||
 | 1.102 | 6.875 | 1.750 | MAZDA | Mazda MPV 4X2 (89-98), CB mounts at an offset . one bracket even( 3.45 bracket ) and the opposite side mounts 1.75" below ( 2.41 bracket ) | ||
 | 1.181 | 4.000 | 2.375 | MERCEDES | Bracket width goes from 5" to 6.7" | ||
 | 1.181 | 6.665 | 2.000 | GM Camaro | |||
 | 1.181 | 6.750 | 1.375 | GM | CADILLAC | ||
 | 1.181 | 7.375 | 1.375 | GM | Camaro 2010+ | ||
 | 1.181 | 7.625 | 1.750 | GM | GTO 04-06 | ||
 | 1.181 | 7.000 | 1.366 | Subaru WRX (15-17) AT | 7 degree mounting tabs | ||
 | 1.181 | 6.250 | 375 | MERCEDES | 1mm mounting tab thickness | ||
 | 1.181 | 6.250 | 375 | MERCEDES | 5.00mm mounting tab thickness | ||
 | 1.181 | 5.750 | 250 | Lexus | IS250 AWD 2006-2008, comes with 2 washers and 1 nut in a plastic bag | ||
 | 1.181 | 7.125 | 1.000 | TOYOTA | Front bearing on 3 piece shaft. 1" from each mounting point to center of bearing. comes with new nut and washer/spacer | ||
 | 1.181 | 8.000 | 375 | TOYOTA | Rear bearing on 3 piece shaft, | ||
 | 1.181 | 5.750 | 0 | Lexus | Lexus IS300 (01-03) LS400 (95-00) | ||
 | 1.102 | 6.875 | 1.750 | MAZDA | CB mounts at an offset . one bracket even( 3.45 bracket ) and the opposite side mounts 1.75" below ( 2.41 bracket ) | ||
 | 1.181 | 7.375 | 0 | Audi/VW | |||
 | 1.181 | 6.750 | 1.500 | GM | 2004-2007 Cadillac CTS-V, Threaded nuts molded into housing at each side mount bracket.. | ||
 | 1.181 | 6.750 | 1.125 | GM | Cadillac SRX | ||
 | 1.181 | 6.250 | 1.875 | Lexus | Lexus SC300 (92-00), SC400 (92-00) | ||
 | 1.181 | 6.250 | 0 | Lexus | Lexus GS300 (98-01) GS400 (98-01) LS430 (01-03) | ||
 | 1.181 | 7.000 | 0 | MULTIPLE | Toyota Highlander (01-06) Lexus RX300/330 (99-06) | ||
 | 1.181 | 6.750 | 250 | GM | SRX | ||
 | 1.181 | 6.250 | 375 | HYUNDAI | 01-06 Hyundai Santa Fe | ||
 | 1.181 | 6.375 | 0 | Dodge D50 (79-80) | Inner bearing width .950 | ||
 | 1.181 | 5.625 | 2.500 | TOYOTA | Supra (88-92) | ||
 | 1.181 | 2.250 | 2.910 | MERCEDES | |||
 | 1.181 | 2.250 | 3.000 | MERCEDES | |||
 | 1.181 | 5.625 | 2.750 | TOYOTA | Supra (90-93) | ||
 | 1.181 | 7.875 | 2.500 | TOYOTA | Rav 4 AWD (96-00) | ||
 | 1.181 | 8.125 | 2.375 | MERCEDES | 2.45mm #1 shim | ||
 | 1.181 | 5.875 | 2.080 | MULTIPLE | |||
 | 1.181 | 5.250 | 750 | MERCEDES | Housing and rubber only. 6006LLU Bearing sold separately | ||
 | 1.181 | 4.875 | 675 | MERCEDES | Mercedes w/ #6 pad / 6006LLU Bearing sold separate | ||
 | 1.181 | 9.000 | 4.125 | AUDI A5, A7 | 2153124300087 on OEM bracket | ||
 | 1.574 | 4.331 | 2.118 | GM | Square outer bracket w/ studs protruding from underneath housing & Octagon inner rubber | ||
 | 1.181 | 2.250 | 2.870 | MERCEDES | |||
 | 1.181 | 9.250 | 3.250 | Buick Encore 13-16, Chevy Trax 15-16, Opel Mokka | |||
 | 1.772 | 7.625 | 2.815 | DODGE | OEM Sprinter 00-06 | ||
 | 1.181 | 5.875 | 0 | TOYOTA | Toyota Corolla AWD (89-92), Rear on 3pc shaft, CB mounts at an offset . one bracket even( 2.32" bracket ) and the opposite side mounts .50" below ( 2.30" bracket ) | ||
 | 1.574 | 6.620 | 2.524 | FORD | FLAT BOTTOM ON BRACKET. ( SITS FLAT ) Used on F250 & F350 application ⋅ Heavy Duty Version | ||
 | 1.181 | 9.000 | 3.370 | Audi | Multiple applications | ||
 | 1.181 | 8.937 | 2.800 | Audi | Audi A6 05-11 (will not fit S6) | ||
 | 1.181 | 16.250 | 4.500 | AUDI Q3/ VW TIGUAN | |||
 | 1.181 | 5.000 | 0 | MERCEDES | |||
 | 1.181 | 8.250 | 2.213 | MERCEDES | Aluminum, Mercedes, w/ 30mm bearing. Need to replace this bearing with a 2880-99 (32mm id) for proper bearing installation on OEM shaft | ||
 | 1.181 | 9.000 | 1.625 | MAZDA | Mazda CX-7 Front CB (3pc shaft) | ||
 | 2.559 | 6.625 | 375 | Jaguar | |||
 | 1.181 | 7.188 | 2.188 | MERCEDES | Mercedes # 1 CB. bearing included | ||
 | 1.181 | 6.827 | 1.043 | GM STS (AWD) | |||
 | 1.181 | 8.625 | 750 | MAZDA | Mazda CX-7 Rear CB ( 3pc Shaft) | ||
 | 1.181 | 5.875 | 0 | TOYOTA | Toyota Corolla AWD (89-92) Front on 3pc shaft | ||
 | 1.574 | 6.533 | 2.752 | Ford & Dodge | Ford Super Duty F450 F550 / Dodge Ram 2500 3500 ⋅ threaded insert, supersedes 4180-45 | ||
 | 1.181 | 6.625 | 0 | PORSCHE PANAMERA | |||
 | 1.181 | 7.500 | 0 | Dodge. Jeep | CL to base mounting points offset 1.00" and 4.00" . Grommets included | ||
 | 1.181 | 6.000 | 500 | Audi | |||
 | 1.181 | 6.625 | 0 | TOYOTA | 88-93 Celica All Trac | ||
 | 1.181 | 7.000 | 2.750 | Audi | Double check centerline to centerline and bearing height. | ||
 | 1.181 | 5.125 | 1.625 | Audi | Double check centerline to centerline and bearing height. | ||
 | 1.181 | 7.500 | 2.250 | Audi | 2008+ Audi A8 | ||
 | 1.181 | 7.375 | 1.500 | Audi | Double check centerline to centerline and bearing height. | ||
 | 1.181 | 7.000 | 3.000 | Audi | Double check centerline to centerline and bearing height. | ||
 | 1.181 | 9.500 | 4.125 | Audi | Double check centerline to centerline and bearing height. | ||
 | 1.181 | 9.375 | 3.375 | Audi | Multiple applications | ||
 | 1.181 | 4.870 | 500 | MERCEDES | NUMBER 1 stamped on mounting tab | ||
 | 1.574 | 0 | 2.600 | Isuzu | Isuzu NPR, NPR-HD, NQR, ENCAVA ⋅ No metal bracket | ||
 | 1.181 | 8.300 | 511 | Ford Edge, Lincoln MKX | Arrow with bearing direction, not replaceable on OEM | ||
 | 1.181 | 9.375 | 3.750 | TOYOTA | Pickup 4X4 (79-88) | ||
 | 1.181 | 8.250 | 1.375 | Fusion | |||
 | 1.181 | 6.000 | 2.875 | Audi | Double check centerline to centerline and bearing height. | ||
 | 1.181 | 5.250 | 1.750 | Audi | Double check centerline to centerline and bearing height. | ||
 | 1.181 | 3.000 | 2.500 | MULTIPLE | Jaguar Volvo, comes with bolts to install(2) | ||
 | 1.181 | 11.102 | 4.921 | AUDI A8/ S8 | |||
 | 1.181 | 8.125 | 1.250 | MERCEDES | measured from the two holes, single holes at 10.375" | ||
 | 1.181 | 6.625 | 2.250 | Jaguar | Jaguar S type / XJ8 / X350 / XJ350 | ||
 | 1.378 | 5.500 | 1.000 | ||||
 | 1.181 | 6.300 | 1.750 | BMW | |||
 | 1.181 | 1.500 | 3.500 | GM | Chevrolet, Billet aluminum bracket w/ poly urethane | ||
 | 1.181 | 3.000 | 2.565 | Jaguar | Jaguar XJR | ||
 | 1.181 | 4.875 | 500 | MERCEDES | C230 02, C55 AMG 05-07, CLK55 AMG 03-06, CLK63 07-09, SLK55 AMG 05-10 ⋅ Mercedes #3 | ||
 | 1.181 | 7.500 | 1.375 | GM | Pontiac G8 | ||
 | 1.574 | 2.250 | 3.500 | GM | Cadillac Buick | ||
 | 1.574 | 1.500 | 2.500 | GM | Cadillac Buick | ||
 | 1.574 | 0 | 0 | Buick | Buick, Bearing not included | ||
 | 1.181 | 8.188 | 2.375 | MERCEDES | Mercedes #5 Pad. bearing included in box | ||
 | 1.181 | 8.188 | 2.500 | MERCEDES | MBZ #6 Pad, bearing included in box. | ||
 | 1.378 | 6.300 | 1.625 | BMW | measured from top of bracket to center line | ||
 | 1.181 | 4.950 | 0 | MERCEDES | #6 on pad | ||
 | 1.181 | 4.900 | 0 | MERCEDES | Housing and rubber only. 6006LLU Bearing sold separately. #2 stamped into bracket | ||
 | 1.574 | 1.500 | 3.500 | 1310 | Chevrolet, Billet aluminum bracket w/ poly urethane |
