2-3-6061KX Slip Yoke 1310 series, Splines: 1.500×16 Center Joint To End 6.875 Heavy Duty
$64.31
+50 in stock
11
People watching this product now!
Description
2-3-6061KX 1310 series heavy-duty slip yoke. 1.500 in (38.1 mm) x 16 spline, 6.875 in center U-joint to end. Verify stop shaft spline diameter and count before ordering.
Full Description
2-3-6061KX 1310 Series Slip Yoke — Heavy Duty
The 2-3-6061KX is a 1310 series heavy-duty slip yoke with a 1.500-inch (38.1 mm) spline diameter and 16-spline count. The centerline-to-end dimension is 6.875 inches. The metric equivalent of the spline spec is 38.1 x 16, as noted in the product data. This yoke slides over the stop shaft at the front of the driveshaft, providing the axial travel needed as the suspension cycles.
Specifications
- Part Number: 2-3-6061KX
- Series: 1310
- Spline Diameter: 1.500 in (38.1 mm)
- Spline Count: 16
- Center U-Joint to End: 6.875 in
- Note: Splines 38.1 x 16 (metric equivalent)
When fitting the 2-3-6061KX, verify the stop shaft diameter is 1.500 inches (38.1 mm) with 16 splines. The larger 1.500-inch bore distinguishes this yoke from standard 1310 slip yokes, which typically run a 1.250-inch or 1.375-inch diameter. Confirm the stop shaft matches this heavier specification before ordering. The 6.875-inch CJ-to-end provides a deep engagement profile suited to applications with significant suspension travel.
Despite the heavy-duty spline sizing, the 2-3-6061KX interfaces with standard 1310 series U-joints at the ear end. Confirm U-joint series compatibility throughout the driveshaft assembly. The metric designation 38.1 x 16 may be used when cross-referencing against metric parts catalogs for this yoke.
Additional information
| Series | 1310 |
|---|---|
| Notes | SPLINES: 38.1X16 ( In Metric ) |
| Partn number | 2-3-6061KX |
| Splines dia | 1.500 |
| Splines count | 16 |
| Center u joint to end | 6.875 |
More Parts from the same Category
Filters Sort results
Reset Apply
Image | Part # | Part Details | Price | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Slip Yoke (100) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Center u joint to end 9.681 Notes Spicer Partn number 100-3-41X Series SPL100 ⋅ SPL90 Splines count 29.30 Splines dia 1.965 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Center u joint to end 9.000 Series 1351-20 Splines count 16 Splines dia 1.500 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Center u joint to end 7.500 Notes Does not fit all Toyota OEM 20 spline stubs. Toyota truck Partn number 1303-20 Series 1351-20 Splines count 20 Splines dia 1.310 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Center u joint to end 9.875 Notes Toyota truck/Land Cruiser This part is only sold in Kit 1343-20L Partn number 1303-20L Series 1351-20 Splines count 20 Splines dia 1.310 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Center u joint to end 6.00 Notes Toyota Land Cruiser Partn number 1303-21 Series 1351-20 Splines count 20 Splines dia 1.310 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Center u joint to end 4.313 Notes brisitish imports Partn number 1403-16 Series 1100 Splines count 16 Splines dia 1.063 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Center u joint to end 5.375 Partn number 1703-16 Series 1751 Splines count 16 Splines dia 1.063 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Center u joint to end 8.016 Series 1210 Splines count 16 Splines dia 1.250 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Center u joint to end 5.375 Notes short slip yoke. Used on industrial shafts. Partn number 2-3-128kx Series 1310 Splines count 16 Splines dia 1.375 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Center u joint to end 5.375 Notes short slip yoke. Used on industrial shafts. Partn number 2-3-128kx Series 1310 Splines count 16 Splines dia 1.375 Brand SPICER | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
