Brand:
Splined Midship Tube Shaft Splines: 1.562×24 , Fits: 3.500 X .083 Tube 3-53-2571
$57.31
7 in stock
10
People watching this product now!
Description
3-53-2571U UDS slip midship shaft. 23/24 x 1.562″ spline, fits 3.500″ OD x 0.083″ wall tube, 1.574″ bearing dia, 9.890″ end-to-weld. Order boot 212007X separately.
Full Description
3-53-2571U UDS Splined Midship Tube Shaft — 1.562" x 23/24 Spline, 3.500" x 0.083" Tube
The 3-53-2571U is a slip-style splined midship tube shaft manufactured by UDS. It features a 23/24 spline count at a 1.562-inch diameter with a spline length of 3.000 inches. The shaft is designed for a 3.500-inch OD tube with a 0.083-inch wall. The butt diameter is 3.344 inches, the end-to-weld dimension is 9.890 inches, and the bearing diameter is 1.574 inches. Per the notes, use boot 212007X (ordered separately); this shaft will not fit applications 4180-10, 4180-45, or 4180-46.
Specifications
- Part Number: 3-53-2571U
- Brand: UDS
- Style: Slip
- Spline Count x Diameter: 23/24 x 1.562"
- Spline Length: 3.000"
- Tube OD: 3.500"
- Tube Wall: 0.083"
- Butt Diameter: 3.344"
- End to Weld: 9.890"
- Bearing Diameter: 1.574"
- Notes: Use boot 212007X (order separate). Will not fit 4180-10, 4180-45, 4180-46
When fitting the 3-53-2571U, confirm the mating slip yoke uses a 23/24-spline bore at 1.562-inch diameter, and verify the tube is 3.500-inch OD x 0.083-inch wall before welding. The 1.574-inch bearing diameter defines the center support bearing bore required for this midship shaft — select a center bearing with a 1.574-inch ID to match. Order boot 212007X separately to seal the spline interface.
The 3-53-2571U is incompatible with applications 4180-10, 4180-45, and 4180-46 — cross-reference these application codes against your assembly before ordering. The 9.890-inch end-to-weld dimension is the full shaft length from splined end to weld point, which determines positioning within the two-piece driveshaft assembly.
Additional information
| Tube dia | 3.500 |
|---|---|
| Tube wall | 0.083″ |
| Butt dia | 3.344 |
| Splines length | 3.000 |
| End to weld | 9.890 |
| Bearing dia | 1.574 |
| Brand | UDS |
| Notes | Use boot 212007X, order separate. Will not fit 4180-10, 4180-45, 4180-46 |
| Splines count dia | 23/24 X 1.562 |
| Style | Slip |
More Parts from the same Category
Filters Sort results
Reset Apply
Image | Part # | Part Details | Price | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Stub & Midship Shaft (169) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Partn number 1253-242 Butt dia 1.875 Splines count dia 24 x 0.995 End to weld 2.875 Style FIXED Notes use is with : 1204-241 nut sold sepratly: 858018 Tube dia 2.000 Tube wall 0.065" Length 1.180 Bearing dia 0.985 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Butt dia 2.375 End to weld 3.125 Notes USE WITH: 1204-261 , Uses 858018 nut Partn number 1253-261 Splines count dia 26 x 1.115 Splines length 1.120 Tube dia 2.500 Tube wall 0.065" Style FIXED | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bearing dia 1.181 Butt dia 1.875 End to weld 2.875 Notes USE WITH: 1204-261 , Uses 858018 nut Partn number 1253-262 Splines count dia 26 x 1.115 Splines length 1.180 Tube dia 2.000 Tube wall 0.065" Style FIXED | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bearing dia 1.181 Butt dia 2.375 End to weld 6.625 Notes This stub also has snap ring groove at 16mm to retain bearing. USE IT WITH: 2252-682 Partn number 1254-681 Splines count dia 19 X 0.850 Splines length 0.775 Tube dia 2.500 Style CVJ Tube wall 0.065" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bearing dia 1.181 Butt dia 2.344 End to weld 6.625 Notes use it with: 2252-682 Partn number 1254-683 Splines count dia 19 X 0.850 Splines length 0.775 Tube dia 2.500 Tube wall 0.083" Style CVJ | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Butt dia 2.435 End to weld 7.500 Notes TOYOTA Partn number 1340-20 Splines count dia 20 X 1.310 Splines length 1.765 Tube dia 2.560 Tube wall 0.065" Style Slip | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Butt dia 2.435 End to weld 9.375 Notes Toyota, Sold only in kit 1343-20L Partn number 1340-20L Splines count dia 20 X 1.310 Splines length 6.500 Tube dia 2.560 Tube wall 0.065" Style Slip | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Butt dia 2.435 End to weld 6.375 Notes TOYOTA Partn number 1340-21 Splines count dia 20 X 1.310 Splines length 1.880 Tube dia 2.560 Tube wall 0.065" Style Slip | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bearing dia 1.181 Butt dia 2.435 End to weld 5.000 Notes Fits Toyota OE Tube / 1374-233 nut included ⋅ Use with: 1301-231 Partn number 1353-231 Splines count dia 23 X 0.990 Splines length 1.375 Tube dia 2.560 Tube wall 0.065" Style FIXED | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bearing dia 1.181 Butt dia 2.344 End to weld 5.000 Notes Fits Toyota OE Tube / 1374-233 nut included ⋅ Use with: 1301-231 Partn number 1353-232 Splines count dia 23 X 0.990 Splines length 1.375 Tube dia 2.500 Tube wall 0.083" Style FIXED | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
