4826-506A Aluminum Weld Yoke 1480 , Fits : 5.000×0.125 Butt Dia: 4.757, Centerline To Weld: 3Inch

Weld yoke selection comes down to two things: tube diameter and series. The ATY1480-500 weld yoke is dimensioned for one specific tube OD and one u-joint series. Everything else — material, finish, weight — comes after you've confirmed those two numbers match your application.

Aty1480-500 Weld Yoke — Tube Fit & Aluminum Specs

The 1480 series covers heavy commercial Class 3-4 trucks and Dana heavy applications. The ATY1480-500 weld yoke specs: fits 4.757 x 0.125 tube | 3.000"" center-to-weld. 6061-T6 Aluminum. Aluminum T6061 — roughly 60% lighter than steel equivalent, corrosion resistant, correct for high-RPM builds where rotating mass matters. Center-to-weld dimension is critical for total shaft length calculations — it's the distance consumed by this yoke on that end of the tube.

Measure your tube OD before cutting and welding the ATY1480-500 weld yoke. Tack it in place first, check runout is within 0.005" before committing to full weld. A slight off-angle tack that gets welded solid will show up as vibration at 50+ mph that no balancer can fully correct.

Key Features

• Series: 1480 — heavy commercial Class 3-4 trucks and Dana heavy applications
• Tube fit: 4.757 x 0.125 — butt diameter is machined specifically for this OD
• Center-to-weld: 3.000"" — factors into total shaft length calculation
• Aluminum T6061 — lightweight, corrosion resistant, reduces rotating inertia
• Brand: UDS
• Note: 6061-T6 Aluminum

Specifications

• SKU: ATY1480-500
• Brand: UDS
• Series: 1480
• Material: Aluminum
• Tube Fit: 4.757 x 0.125
• Center to Weld: 3.000""
• Notes: 6061-T6 Aluminum