1453-863 – Stub Midship Shaft – Bearing Dia 1.181″ – Butt Dia 2.344″ – End To Weld 5.395
$94.42
1 in stock
14
People watching this product now!
Description
1453-863 stub midship shaft — slip style. Bearing dia: 1.181″. Butt: 2.344″. Splines: 21 x 0.900″. End-to-weld: 5.395″. 2.000″ x 0.083″ tube.
Full Description
The 1453-863 is a slip-style stub midship shaft, meaning the splined end of the shaft slides into a mating slip yoke rather than using a fixed or CVJ interface. Slip-style midship shafts accommodate axial movement in the driveshaft assembly, absorbing chassis flex and allowing slight changes in effective shaft length during suspension travel.
The 21-spline x 0.900" specification is specific to this application and mates with the 1426-863 CVJ weld yoke per the catalog note. The 2.000" OD tube (smaller than the 2.500" used on many other stub shafts in this series) indicates a lighter-duty application, likely a smaller RWD vehicle or a secondary shaft section in a multi-piece arrangement.
| Specification | Value |
|---|---|
| Part Number | 1453-863 |
| Style | Slip |
| Bearing Diameter | 1.181" |
| Butt Diameter | 2.344" |
| Tube OD | 2.000" |
| Tube Wall | 0.083" |
| End-to-Weld | 5.395" |
| Spline | 21 x 0.900" |
| Spline Length | 0.931" |
| Mating Component | 1426-863 CVJ weld yoke |
Note that the catalog specifies this uses a "fixed CVJ set up" with the 1426-863 CVJ weld yoke. This means despite the slip-style classification, the assembled drivetrain uses a fixed CVJ interface at one end. Ensure you have the 1426-863 yoke before ordering this shaft stub if building a complete assembly.
See all stub and midship shaft components.
Additional information
| Bearing dia | 1.181 |
|---|---|
| Butt dia | 2.344 |
| End to weld | 5.395 |
| Notes | fixed cvj set up with 1426-863 cvj weld yoke, USED WITH: 1452-8602 |
| Partn number | 1453-863 |
| Splines count dia | 21 X 0.900 |
| Splines length | 0.931 |
| Tube dia | 2.000 |
| Tube wall | 0.083″ |
| Style | Slip |
More Parts from the same Category
Filters Sort results
Reset Apply
Image | Part # | Part Details | Price | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Stub & Midship Shaft (169) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Partn number 1253-242 Butt dia 1.875 Splines count dia 24 x 0.995 End to weld 2.875 Style FIXED Notes use is with : 1204-241 nut sold sepratly: 858018 Tube dia 2.000 Tube wall 0.065" Length 1.180 Bearing dia 0.985 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Butt dia 2.375 End to weld 3.125 Notes USE WITH: 1204-261 , Uses 858018 nut Partn number 1253-261 Splines count dia 26 x 1.115 Splines length 1.120 Tube dia 2.500 Tube wall 0.065" Style FIXED | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bearing dia 1.181 Butt dia 1.875 End to weld 2.875 Notes USE WITH: 1204-261 , Uses 858018 nut Partn number 1253-262 Splines count dia 26 x 1.115 Splines length 1.180 Tube dia 2.000 Tube wall 0.065" Style FIXED | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bearing dia 1.181 Butt dia 2.375 End to weld 6.625 Notes This stub also has snap ring groove at 16mm to retain bearing. USE IT WITH: 2252-682 Partn number 1254-681 Splines count dia 19 X 0.850 Splines length 0.775 Tube dia 2.500 Style CVJ Tube wall 0.065" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bearing dia 1.181 Butt dia 2.344 End to weld 6.625 Notes use it with: 2252-682 Partn number 1254-683 Splines count dia 19 X 0.850 Splines length 0.775 Tube dia 2.500 Tube wall 0.083" Style CVJ | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Butt dia 2.435 End to weld 7.500 Notes TOYOTA Partn number 1340-20 Splines count dia 20 X 1.310 Splines length 1.765 Tube dia 2.560 Tube wall 0.065" Style Slip | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Butt dia 2.435 End to weld 9.375 Notes Toyota, Sold only in kit 1343-20L Partn number 1340-20L Splines count dia 20 X 1.310 Splines length 6.500 Tube dia 2.560 Tube wall 0.065" Style Slip | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Butt dia 2.435 End to weld 6.375 Notes TOYOTA Partn number 1340-21 Splines count dia 20 X 1.310 Splines length 1.880 Tube dia 2.560 Tube wall 0.065" Style Slip | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bearing dia 1.181 Butt dia 2.435 End to weld 5.000 Notes Fits Toyota OE Tube / 1374-233 nut included ⋅ Use with: 1301-231 Partn number 1353-231 Splines count dia 23 X 0.990 Splines length 1.375 Tube dia 2.560 Tube wall 0.065" Style FIXED | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bearing dia 1.181 Butt dia 2.344 End to weld 5.000 Notes Fits Toyota OE Tube / 1374-233 nut included ⋅ Use with: 1301-231 Partn number 1353-232 Splines count dia 23 X 0.990 Splines length 1.375 Tube dia 2.500 Tube wall 0.083" Style FIXED | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
