Brand:
2-28-1697 Weld Tube Yoke 1330 , Fits: 3.000 x 0.083 Tube, Butt Dia: 2.844 Centerline To Weld: 1.720
$19.76
+50 in stock
13
People watching this product now!
Description
2-28-1697 Weld Yoke — Steel, 1330 series, fits 3.000X0.083 tube | 2.844″ butt dia | 1.719″ center-to-weld. Premium weld-on replacement. Match tube OD before ordering.
Full Description
The 2-28-1697 weld yoke is the weld-on tube-end connection for 1330 series driveshaft assemblies. It slides over or butts up to the driveshaft tube and welds in place, forming the permanent u-joint cradle at that end of the shaft. Butt diameter must match your tube OD precisely — a loose fit produces an off-center weld joint that no amount of balancing will fix.
2-28-1697 Weld Yoke — Tube Fit & Steel Specs
The 1330 series covers light-to-medium duty trucks and GM half-ton platforms. The 2-28-1697 weld yoke specs: fits 3.000X0.083 tube | 2.844" butt dia | 1.719" center-to-weld. Steel construction — DOM-compatible, full-penetration weld ready, standard for high-torque driveshaft applications. Center-to-weld dimension is critical for total shaft length calculations — it's the distance consumed by this yoke on that end of the tube.
Measure your tube OD before cutting and welding the 2-28-1697 weld yoke. Tack it in place first, check runout is within 0.005" before committing to full weld. A slight off-angle tack that gets welded solid will show up as vibration at 50+ mph that no balancer can fully correct.
Key Features
- Series: 1330 — light-to-medium duty trucks and GM half-ton platforms
- Tube fit: 3.000X0.083 — butt diameter is machined specifically for this OD
- Butt dia: 2.844" — must match tube OD precisely for a centered weld joint
- Center-to-weld: 1.719" — factors into total shaft length calculation
- Steel — DOM-compatible, full-penetration weld, standard drivetrain spec
- Brand: UDS
Specifications
- SKU: 2-28-1697
- Brand: UDS
- Series: 1330
- Material: Steel
- Tube Fit: 3.000X0.083
- Butt Dia: 2.844"
- Center to Weld: 1.719"
Additional information
| Butt dia |
2.844 |
|---|---|
| Center u j to weld |
1.719 |
| Material |
STEEL |
| Partn number |
2-28-1697 |
| Series |
1330 |
| Tube dia wall |
3.000X0.083 |
| Brand |
UDS |
More Parts from the same Category
Filters Sort results
Reset Apply
Image | Part # | Part Details | Price | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Weld Yokes (191) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Butt dia 3.810" Center u j to weld 2.969 Material STEEL Partn number 100-28-17 Series SPL90/100 Tube dia wall 4.000X0.095 Brand SPICER | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Butt dia 2.321 Center u j to weld 1.688 Material STEEL Partn number 110679 Series 1310 Tube dia wall 2.500X0.095 Brand UDS Notes Butt Diameter 58.95 mm | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Butt dia 1.571 Center u j to weld 1.625 Material STEEL Notes INFINITI FRONT SHAFT Partn number 1126-1711 Series 9951-22 Tube dia wall 1.750X0.095 Brand UDS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Butt dia 1.667 Center u j to weld 1.750" Material STEEL Partn number 1226-17 Series 1251 Tube dia wall 1.775X.0.65 Brand UDS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Butt dia 1.844 Center u j to weld 1.750" Material STEEL Notes FOREIGN Partn number 1226-20 Series 1251 Tube dia wall 2.000X0.083 Brand UDS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Butt dia 1.875 Center u j to weld 1.750" Material STEEL Notes FOREIGN Partn number 1226-201 Series 1251 Tube dia wall 2.000x0.065 Brand UDS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Butt dia 2.140" Center u j to weld 1.750" Material STEEL Notes FOREIGN Partn number 1226-22 Series 1251 Tube dia wall 2.370X0.065 Brand UDS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Butt dia 2.375 Center u j to weld 1.750" Material STEEL Notes FOREIGN Partn number 1226-25 Series 1251 Tube dia wall 2.500X0.065 Brand UDS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Butt dia 2.375 Center u j to weld 1.375 Material STEEL Notes FOREIGN - HONDA Partn number 1226-251 Series 1251-22 Tube dia wall 2.500X0.065 Brand UDS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Butt dia 2.400" Center u j to weld 1.750" Material STEEL Notes FOREIGN Partn number 1226-26 Series 1251 Tube dia wall 2.550X0.080 Brand UDS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
