3-82-271 – Yoke Shafts – 1480 Series – 2.250″ Splines Dia – 10 Spline

The 3-82-271 yoke shaft is an integrated assembly — splined shaft on one end, u-joint yoke on the other. It splines onto the output shaft and carries the u-joint cross simultaneously, in one part. For 1480 series applications, both the spline specification and the u-joint series have to be correct. One wrong dimension on either end and the part doesn't work.

3-82-271 Yoke Shaft — 1480 Series Spline & CL Specs

The 1480 series covers heavy commercial Class 3-4 trucks and Dana heavy applications. The 3-82-271 yoke shaft specs: 2.250" x 10 spline | 1.594" spline length | 4.380" CL-to-end. Spline length determines engagement depth — short engagement under high torque loads damages the output shaft, not just the yoke shaft. CL-to-end positions the u-joint cross relative to the output shaft face; this affects clearance on tight installations.

Verify both ends of the 3-82-271 yoke shaft before installing: spline count against the output shaft, and series cross size against the driveshaft u-joint. If either is wrong, the part has to come back out. Measure once, order correctly.

Key Features

• Series: 1480 — heavy commercial Class 3-4 trucks and Dana heavy applications
• Spline: 2.250" x 10 — must match output shaft exactly
• Spline length: 1.594" — full engagement required
• CL-to-end: 4.380" — u-joint position from output shaft face
• Integrated design — splined shaft and u-joint yoke in one piece
• Brand: UDS

Specifications

• SKU: 3-82-271
• Brand: UDS
• Series: 1480
• Spline Dia: 2.250"
• Spline Count: 10
• Spline Length: 1.594"
• CL to End: 4.380"