2-3-14031X Transmission Slip Yoke..1330 series, 1.284×30 spline, 1.680 Ground Hub Diameter

2-3-14031X Transmission Slip Yoke 1330 Series 1.284x30 Spline Chrysler Nickel Plated

The 2-3-14031X is a 1330 series transmission slip yoke with a 1.284" spline diameter and 29/30 spline count. The center U-joint to end dimension is 8.030", the hub diameter is 1.681", and the counter bore is 1.440". Per the Notes attribute, this yoke is nickel plated and fits the Chrysler 46RH, 46RE, 47RE, 727, and A518 transmissions. Nickel plating provides corrosion resistance and a consistent surface for tail seal contact.

Specifications

• Part Number: 2-3-14031X
• Series: 1330
• Spline Count x Diameter: 29/30 x 1.284"
• Center U-Joint to End: 8.030"
• Hub Diameter: 1.681"
• Counter Bore Diameter: 1.440"
• Notes: Nickel plated; fits Chrysler 46RH/46RE/47RE/727/A518

When fitting the 2-3-14031X, confirm the Chrysler transmission (46RH, 46RE, 47RE, 727, or A518) output shaft carries 29 or 30 splines at 1.284" diameter. The 1.440" counter bore accommodates any pilot or retainer on the shaft end — verify there is no interference with the output shaft tip geometry. The 8.030" CL-to-end and 1.681" hub diameter must be confirmed against the transmission tail housing seal bore and engagement depth requirements. The 2-3-14031X covers a broad range of Chrysler automatic transmissions spanning several decades of Mopar applications — the 727 and A518 share the same output spline spec as the 46RH/46RE/47RE family. Nickel plating distinguishes this yoke from bare steel equivalents; the plating must not be damaged or removed at the seal contact area. The 1330 series torque capacity sits above 1310 — confirm mating drivetrain components are also rated 1330 series. Count tailshaft splines before ordering.