3-4-13881-1 End Yoke Spicer – Splined Bore 1350 Series, Strap Style, 1.500×10 Spline, 1.810 Hub
$64.26
+50 in stock
13
People watching this product now!
Description
3-4-13881-1 Spicer 1350 series strap end yoke. 10-spline 1.500″ bore, 3.695″ CJ-to-end, 2.156″ hub diameter. Spicer factory part number — requires strap-type 1350 U-joint. Verify output shaft spline count before ordering.
Full Description
3-4-13881-1 Spicer 1350 Strap End Yoke -- 10x1.500" Spline, 3.695" CJ-to-End
The 3-4-13881-1 is a Spicer-numbered 1350 end yoke with strap retention. Spicer numbering on this part means it was engineered and catalogued by Dana Incorporated (parent of the Spicer brand) for specific OEM driveshaft assemblies. When a workshop manual or parts catalog references 3-4-13881-1 by this exact number, this is the correct stock part -- not a generic equivalent.
Spline bore: 1.500 inches, 10 splines. CJ-to-end: 3.695 inches. Hub diameter: 2.156 inches. Through-hole bore: 2.000 inches. The hub diameter is the outer diameter of the cylindrical section that seats against the output shaft housing or bearing; the through-hole must clear the retaining nut on the shaft stub. Strap retention requires a strap-style 1350 U-joint -- snap-ring-groove U-joints do not fit.
Compared to the 3-4-8511-1 (same hub and through-hole dimensions), the 3-4-13881-1 is 0.071 inches shorter at the CJ-to-end. On an OEM application this difference is calculated into the driveshaft length; use the correct part number rather than substituting a yoke with a different CJ-to-end.
Specifications
- Part Number: 3-4-13881-1 (Spicer)
- Series: 1350, strap retention
- Spline Bore: 1.500" x 10 splines
- CJ to End: 3.695"
- Hub Diameter: 2.156"
- Through-Hole: 2.000"
Complete stock of Spicer and equivalent End Yokes for 1350 series applications.
Additional information
| Cj to end | 3.695 |
|---|---|
| Hub dia | 2.156 |
| Partn number | 3-4-13881-1 |
| Series | 1350 |
| Splines count | 10 |
| Splines dia | 1.500″ |
| Style | BS |
| Through hole | 2.000″ |
More Parts from the same Category
Filters Sort results
Reset Apply
Image | Part # | Part Details | Price | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| End Yokes (146) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bore type splined Cj to end 2.50 Hub dia 1.62 Keyway N/A Series 1000 Through hole 1.20 Bore dia 1.125 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 2.50 Hub dia 2.25 Partn number 10-4-143 Bore dia 1.125 Bore type round Keyway GAP - 0.25 Brand UDS Splines count N/A Style ISR Series 1000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bore type round Cj to end 2.50 Hub dia 1.62 Keyway GAP - 0.25 Series 1000 Through hole 1.20 Bore dia 938 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 2.900" Hub dia 1.342 Notes USED ON 2 PCS SHAFT FOR SUBARU TO REPLACE THE CENTER CV SECTION Partn number 1204-241U Series 1251 Splines count 22/24 Splines dia 995 Style SR Through hole 1.300" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 3.312 Hub dia 1.445 Notes USED ON 2 PCS SHAFT FOR SUBARU TO REPLACE THE CENTER CVJ SECTION Partn number 1204-261U Series 1251 Splines count 24/26 Splines dia 1.115 Style SR Through hole 1.300" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 6.200" Hub dia 3.819 Partn number 131446KS Series SPL250 Splines count 49 Splines dia 2.544 Style BS Through hole 2.672 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 2.750" Hub dia 1.420" Notes FITS STUB: 1453-232 OR 3053-233 Partn number 1404-22 Series 1100 Splines count 22/23 Splines dia 0.990" Style SR Through hole 1.360" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 3.250" Hub dia 1.420" Notes FITS STUB: 1453-232 OR 3053-233 Partn number 1404-231 Series 1100 Splines count 22/23 Splines dia 0.990" Style SR Through hole 1.800" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 3.265 Hub dia 1.416 Notes USED ON MERKUR SHAFTS Partn number 1404-261 Series 1100 Splines count 26 Splines dia 1.129 Style SR Through hole 1.824 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 5.590" Hub dia 2.879 Notes COUPLING SHAFT YOKE Partn number 170-4-1271-1 Series SPL170 Splines count 46 Splines dia 2.390" Style BS Through hole 2.750" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
