3326-506A Aluminum Weld Yoke 1330, Fits : 5.000×0.125 Butt Dia: 4.757, Centerline To Weld: 3 Inch

ATY1330-500 UDS 1330 Series 6061-T6 Aluminum Weld Yoke for 5.000x0.125 Tube

The ATY1330-500 is a 1330 series weld yoke manufactured by UDS in 6061-T6 aluminum. The butt diameter is 4.757" and the centerline-to-weld dimension is 3.000". It is designed for 5.000" OD x 0.125" wall tube. Also referenced as part 3326-506A.

Specifications

• Part Number: ATY1330-500 (Ref: 3326-506A)
• Brand: UDS
• Series: 1330
• Material: 6061-T6 Aluminum
• Butt Diameter: 4.757"
• Center UJ to Weld: 3.000"
• Tube Diameter x Wall: 5.000 x 0.125"

When preparing the ATY1330-500 for welding, confirm tube OD is 5.000" and wall is 0.125". The 4.757" butt diameter is machined for this specific aluminum tube specification. Aluminum-to-aluminum welding of this yoke to the tube requires proper filler alloy selection and preheat procedure to maintain the 6061-T6 temper properties at the heat-affected zone. The ATY1330-500 is the 1330-series variant of this 5.000" tube aluminum weld yoke family; compare against the ATY1350-500, ATY1410-500, ATY1480-500, and ATY1550-500 variants when selecting the correct series for the driveshaft application. The 6061-T6 aluminum construction reduces rotational mass relative to steel, which can reduce driveline vibration amplitude at high RPM. The 3.000" CL-to-weld must be included in the total driveshaft length calculation.