2726-257 – Tri & Quad Prongs – Bolt Circle Dia 96MM – Butt Dia 2.344″ – Face To Weld 1.125

The 2726-257 covers BMW applications with a 96mm bolt circle, 12mm bolt holes, no pilot bore, and 28mm nose bushing. Multiple BMW tri-prong yokes exist on the 96mm pattern with different face-to-weld dimensions; the 2726-257 at 1.125" FTW is among the shortest, appropriate for applications where the driveshaft must remain as compact as possible.

The absence of a pilot bore (N/A) is common on BMW differential flanges from the E30 through early E46 era. Without a pilot, concentricity relies on the bolt torque and the bolt hole clearance. This is adequate for passenger car applications at normal highway speeds.

• Part Number: 2726-257
• Application: BMW
• Bolt Circle Dia: 96mm
• Bolt Hole Dia: 12mm
• Pilot: N/A (none)
• Nose Bushing Dia: 28mm
• Butt Diameter: 2.344"
• Face-to-Weld: 1.125"
• Tube: 2.500" x 0.083"

Compare 2726-257 with 2726-251 (96mm, 12mm holes, no pilot, 2.375" butt, 0.065" wall tube) - same pattern but different butt diameter and tube wall. The 2726-257 uses 2.344" butt/0.083" wall while 2726-251 uses 2.375" butt/0.065" wall. Measure the tube wall before ordering to distinguish between these two similar-looking BMW yokes.

Browse tri and quad prong yokes.