2726-254 – Tri & Quad Prongs – Bolt Circle Dia 110MM – Bolt Hole Dia 12MM – Butt Dia 2.344

The 2726-254 is a BMW tri-prong yoke with a 110mm bolt circle, placing it on the largest bolt circle commonly used in the BMW prong-yoke series. This 110mm pattern appears on larger BMW platforms: E38 7-series, E39 5-series, E65/E66 7-series, and some X5 E53 variants.

The 22mm pilot and 28mm nose bushing are consistent with other conventional-socket BMW prong yokes in the 2726 series. The 110mm bolt circle is the key distinguishing dimension from the 96mm and 105mm variants.

When ordering for a BMW 7-series or larger 5-series, measure the bolt circle before ordering to confirm 110mm. Bolt circles are measured center-to-center across the full span (not adjacent holes). On a three-bolt pattern, the bolt circle diameter equals the distance from one bolt center to another divided by sin(60 degrees), which is approximately 1.155 times the adjacent bolt center distance. Alternatively, measure the distance between any two bolt centers and multiply by 1.155 to get the bolt circle diameter.

Browse all tri and quad prong yokes.