4803-341 Transmission Yoke 1480 Series 40038571 Splines count 32/34 Hub Diameter: 2.300 Dodge New Models 40041575
$78.15
30 in stock
11 People watching this product now!
Description
4803-341 UDS 1480 series slip yoke. Splines: 32/34 X 1.750, CJ-to-end: 9.551″. Verify stop shaft spline count and diameter before ordering.
Full Description
4803-341 UDS 1480 Slip Yoke
The 4803-341 is a 1480 series slip yoke manufactured by UDS. The slip yoke slides over the stop shaft — the splined stub welded onto the front section of the driveshaft tube — and telescopes in and out as the suspension cycles. This allows the driveshaft to change working length without binding.
The spline bore is 32/34-inch diameter with 1.750 splines. The stop shaft on the driveshaft tube must have an identical 32/34-inch diameter and 1.750-spline profile — a mismatch in either count or diameter means the yoke will not engage. The centerline-to-end dimension is 9.551 inches, measured from the U-joint centerline to the open end of the spline bore. This controls minimum engagement depth under full suspension droop — ensure sufficient spline overlap remains at maximum driveshaft extension. Dodge trans slip yoke. The 1480 series ranks above 1410 in torque capacity, with a 1.375-inch cap diameter, suited for heavy-duty commercial trucks and large SUVs.
Specifications
- Part Number: 4803-341
- Brand: UDS
- Series: 1480
- Center u joint to end: 9.551
- Counter bore dia: 0
- Hub dia: 2.300
- Notes: Dodge trans slip yoke
- Splines count dia: 32/34 X 1.750
Fitment & Installation Notes
When selecting the 4803-341, verify the stop shaft spline count and diameter match the 32/34 X 1.750 specification. Inspect the stop shaft for wear or damage; a worn shaft will produce lash even with a new yoke.
View the full range of Transmission Yokes in 1480 and adjacent series configurations.
Additional information
| Center u joint to end | 9.551 |
|---|---|
| Counter bore dia | |
| Hub dia | 2.300 |
| Notes | Dodge trans slip yoke |
| Partn number | 4803-341 |
| Series | 1480 |
| Splines count dia | 32/34 X 1.750 |
More Parts from the same Category
Filters Sort results
Reset Apply
Image | Part # | Part Details | Price | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Transmission Yokes (167) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Center u joint to end 4.875 Counter bore dia 910 Hub dia 1.178 Notes NISSAN- SUBARU Partn number 1203-18 Series 1251 Splines count dia 18 X 0.800 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Center u joint to end 5.875 Counter bore dia 1.038 Hub dia 1.375 Notes NISSAN- SUBARU Partn number 1203-24 Series 1251 Splines count dia 22/24 X 0.995 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Center u joint to end 5.250 Counter bore dia 1.100 Hub dia 1.375 Notes NISSAN- SUBARU Partn number 1203-241 Series 1251 Splines count dia 22/24 X 0.995 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Center u joint to end 4.750 Counter bore dia 1.000 Hub dia 1.375 Notes Nissan Partn number 1203-24S Series 1251 Splines count dia 22/24 X 0.995 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Center u joint to end 6.000 Counter bore dia 1.250 Hub dia 1.495 Notes Nissan Partn number 1203-26 Series 1251 Splines count dia 24/26 X 1.115 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Center u joint to end 6.000 Counter bore dia 1.125 Hub dia 1.375 Notes Nissan Partn number 1203-26S Series 1251 Splines count dia 24/26 X 1.115 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Center u joint to end 6.125 Counter bore dia 0 Hub dia 1.575 Notes Toyota Car and Truck / Typically automatic trans Partn number 1303-23 Series 1351-20 Splines count dia 23 X 1.200 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Center u joint to end 6.125 Counter bore dia 0 Hub dia 1.495 Notes Toyota Car and Truck Partn number 1303-41 Series 1351-20 Splines count dia 21 X 1.100 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Center u joint to end 5.500 Counter bore dia 1.079 Hub dia 1.298 Notes Capri Partn number 1403-10 Series 1100 Splines count dia 10 X 1.000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Center u joint to end 5.500 Counter bore dia 0 Hub dia 1.375 Notes Capri Partn number 1403-25 Series 1100 Splines count dia 24/25 X 1.109 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
