3-28-557U – Weld Yokes – 1410 Series – Butt Dia 2.844″ – Tube Dia Wall 3.500×0.095

Building or rebuilding a 1410 series driveshaft means getting the weld yoke right first. The 3-28-557U weld yoke is machined for one tube diameter and one series — those two specs are non-negotiable. Get the butt diameter wrong and the weld joint is already compromised before you strike the arc.

3-28-557U Weld Yoke — Tube Fit & Steel Specs

The 1410 series covers HD trucks — F-250/350/450, Ram 2500/3500, Dana 60/70 axles. The 3-28-557U weld yoke specs: fits 3.500x0.095 tube | 2.844" butt dia | 2.125" center-to-weld. Steel construction — DOM-compatible, full-penetration weld ready, standard for high-torque driveshaft applications. Center-to-weld dimension is critical for total shaft length calculations — it's the distance consumed by this yoke on that end of the tube.

Measure your tube OD before cutting and welding the 3-28-557U weld yoke. Tack it in place first, check runout is within 0.005" before committing to full weld. A slight off-angle tack that gets welded solid will show up as vibration at 50+ mph that no balancer can fully correct.

Key Features

• Series: 1410 — HD trucks — F-250/350/450, Ram 2500/3500, Dana 60/70 axles
• Tube fit: 3.500x0.095 — butt diameter is machined specifically for this OD
• Butt dia: 2.844" — must match tube OD precisely for a centered weld joint
• Center-to-weld: 2.125" — factors into total shaft length calculation
• Steel — DOM-compatible, full-penetration weld, standard drivetrain spec
• Brand: SPICER

Specifications

• SKU: 3-28-557U
• Brand: SPICER
• Series: 1410
• Material: Steel
• Tube Fit: 3.500x0.095
• Butt Dia: 2.844"
• Center to Weld: 2.125"