3104-261CV – End Yoke – 1.146″ Splines Dia – 26 Spline
$104.06
0 in stock
12 People watching this product now!
Description
3104-261Cv End Yoke — 1310 series, 1.146 x 26 spline | 1.453″ hub dia | 3.000″” CJ-to-end | 1.500″ bore. Premium replacement, spline-specific fit. Count splines before ordering.
Full Description
End yoke failures are usually easy to diagnose: cracked ears, worn splines, or corrosion at the cap bores. Whatever the cause, the 3104-261CV end yoke is the direct replacement for 1310 series applications. Spline count and shaft diameter both have to match — verify yours before ordering.
3104-261Cv End Yoke — Spline Specs & 1310 Series Fitment
The 1310 series covers light-duty trucks — F-150, Silverado 1500, Jeep Wrangler, Ram 1500. The 3104-261CV end yoke specs: 1.146 x 26 spline | 1.453" hub dia | 3.000"" CJ-to-end | 1.500" bore. USED TO BOLT UP FOR AN OPEN SOCKET STYLE CV HEAD TO CENTER SECTION. Hub diameter is the outer dimension that clears the axle housing or T-case bore. CJ-to-end determines how the u-joint positions relative to the flange or seal surface.
Count the splines on your output shaft — don't go by the vehicle model alone. Axle swaps and rebuilds can change the spline count from the original. The 3104-261CV end yoke is dimensioned for one spline specification; putting it on the wrong shaft will damage both the yoke and the shaft.
Key Features
- Series: 1310 — light-duty trucks — F-150, Silverado 1500, Jeep Wrangler, Ram 1500
- Spline: 1.146 x 26 — must match output shaft exactly
- Hub dia: 1.453" — outer dimension, verify clearance
- CJ-to-end: 3.000"" — positions u-joint relative to axle flange
- Bore: 1.500"
- Style: CV
- Brand: UDS
- Note: USED TO BOLT UP FOR AN OPEN SOCKET STYLE CV HEAD TO CENTER SECTION
Specifications
- SKU: 3104-261CV
- Brand: UDS
- Series: 1310
- Spline Dia: 1.146
- Spline Count: 26
- Hub Dia: 1.453"
- CJ to End: 3.000""
- Through Hole: 1.500"
- Style: CV
- Notes: USED TO BOLT UP FOR AN OPEN SOCKET STYLE CV HEAD TO CENTER SECTION
Additional information
| Cj to end | 3.000" |
|---|---|
| Hub dia | 1.453 |
| Notes | USED TO BOLT UP FOR AN OPEN SOCKET STYLE CV HEAD TO CENTER SECTION |
| Partn number | 3104-261CV |
| Series | 1310 |
| Splines count | 26 |
| Splines dia | 1.146 |
| Style | CV |
| Through hole | 1.500" |
More Parts from the same Category
Filters Sort results
Reset Apply
Image | Part # | Part Details | Price | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| End Yokes (145) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 2.50 Hub dia 2.25 Partn number 10-4-143 Bore dia 1.125 Bore type round Keyway GAP - 0.25 Brand UDS Splines count N/A Style ISR | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Bore type round Cj to end 2.50 Hub dia 1.62 Keyway GAP - 0.25 Series 1000 Through hole 1.20 Bore dia 938 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Cj to end 2.900" Hub dia 1.342 Notes USED ON 2 PCS SHAFT FOR SUBARU TO REPLACE THE CENTER CV SECTION Partn number 1204-241U Series 1251 Splines count 22/24 Splines dia 995 Style SR Through hole 1.300" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Cj to end 3.312 Hub dia 1.445 Notes USED ON 2 PCS SHAFT FOR SUBARU TO REPLACE THE CENTER CVJ SECTION Partn number 1204-261U Series 1251 Splines count 24/26 Splines dia 1.115 Style SR Through hole 1.300" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Cj to end 6.200" Hub dia 3.819 Partn number 131446KS Series SPL250 Splines count 49 Splines dia 2.544 Style BS Through hole 2.672 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Cj to end 2.750" Hub dia 1.420" Notes FITS STUB: 1453-232 OR 3053-233 Partn number 1404-22 Series 1100 Splines count 22/23 Splines dia 0.990" Style SR Through hole 1.360" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Cj to end 3.250" Hub dia 1.420" Notes FITS STUB: 1453-232 OR 3053-233 Partn number 1404-231 Series 1100 Splines count 22/23 Splines dia 0.990" Style SR Through hole 1.800" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Cj to end 3.265 Hub dia 1.416 Notes USED ON MERKUR SHAFTS Partn number 1404-261 Series 1100 Splines count 26 Splines dia 1.129 Style SR Through hole 1.824 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Cj to end 5.590" Hub dia 2.879 Notes COUPLING SHAFT YOKE Partn number 170-4-1271-1 Series SPL170 Splines count 46 Splines dia 2.390" Style BS Through hole 2.750" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Cj to end 6.240" Hub dia 3.000" Partn number 170-4-281-1 Series SPL170 Splines count 39 Splines dia 2.024 Style BS Through hole 2.281 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
