3526-25 – Ball Stud Yokes – 1350 Series – Ball Stud Length Dia 0.500X0.600 – Butt Dia 2.321

3526-25 UDS 1350 Series Ball Stud Yoke

The 3526-25 is a 1350 series ball stud yoke manufactured by UDS. It accepts a tube diameter and wall thickness of 2.500×0.095 and features a butt diameter of 2.321”. The ball stud length diameter measures 0.500×0.600, and the center U-joint to weld dimension is 1.440”. This yoke includes a dust cover rubber seal at the ball stud interface.

Specifications

• Part Number: 3526-25
• Brand: UDS
• Series: 1350
• Ball Stud Length Dia: 0.500×0.600
• Butt Dia: 2.321”
• Tube Dia Wall: 2.500×0.095
• Center U-Joint to Weld: 1.440”
• Notes: Dust Cover Rubber

When fitting the 3526-25, verify the tube OD of 2.500” and wall thickness of 0.095” match the driveshaft tube before welding. The butt diameter of 2.321” must seat squarely against the tube end; confirm this dimension against your tube spec before committing to weld. The 1350 series sits above 1330 in torque capacity and is commonly used in light truck and performance drivetrain applications.

The dust cover rubber included with the 3526-25 protects the ball stud socket from contamination—inspect this seal during installation and replace if cracked. The 1.440” center U-joint to weld measurement positions the U-joint ears relative to the weld point; use this dimension to confirm clearance with your driveshaft assembly. Cross-reference this part against your existing tube and yoke specs before ordering.