3-4-1441-1 End Yoke – Splined Bore 1350 Series, Strap Style, 1.500×10 Spline, 2.250 Hub
$56.73
+50 in stock
20
People watching this product now!
Description
3-4-1441-1 1350 series strap end yoke. 10-spline 1.500″ bore, 3.500″ CJ-to-end, 2.250″ hub diameter, 2.000″ through-hole. Short CJ-to-end for compact output packaging. Strap-type 1350 U-joint required.
Full Description
3-4-1441-1 -- 1350 Strap End Yoke, 3.500" CJ-to-End, 10-Spline 1.500" Bore
Among the 10-spline 1.500-inch strap-style 1350 end yokes, the 3-4-1441-1 has the shortest CJ-to-end at 3.500 inches. Every 0.100 inch of CJ-to-end difference translates directly into driveshaft length -- a yoke 0.405 inches shorter at the CJ-to-end than the 3-4-2231-1 means the same driveshaft tube would put the transmission 0.405 inches closer to the axle. On a direct swap, the original yoke's CJ-to-end must match 3.500 inches; if it doesn't, the driveshaft length changes.
Hub diameter is 2.250 inches. Through-hole bore is 2.000 inches -- the smallest in this strap-yoke family, which means the retaining nut must fit within this bore. Spline bore engages 10 splines at 1.500-inch diameter on the output shaft. Strap retention: the U-joint must have the strap-bolt holes on the bearing cap flanges; snap-ring-groove caps cannot be retained in these ears.
Quick-Reference Specs
| Part Number | 3-4-1441-1 |
| Series | 1350 / strap style |
| Spline Bore | 1.500" x 10 splines |
| CJ to End | 3.500" |
| Hub Diameter | 2.250" |
| Through-Hole | 2.000" |
Shop all End Yokes in 1350 strap and snap-ring configurations with a range of CJ-to-end dimensions.
Additional information
| Cj to end | 3.500″ |
|---|---|
| Hub dia | 2.250 |
| Partn number | 3-4-1441-1 |
| Series | 1350 |
| Splines count | 10 |
| Splines dia | 1.500″ |
| Style | BS |
| Through hole | 2.000″ |
More Parts from the same Category
Filters Sort results
Reset Apply
Image | Part # | Part Details | Price | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| End Yokes (146) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bore type splined Cj to end 2.50 Hub dia 1.62 Keyway N/A Series 1000 Through hole 1.20 Bore dia 1.125 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 2.50 Hub dia 2.25 Partn number 10-4-143 Bore dia 1.125 Bore type round Keyway GAP - 0.25 Brand UDS Splines count N/A Style ISR Series 1000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bore type round Cj to end 2.50 Hub dia 1.62 Keyway GAP - 0.25 Series 1000 Through hole 1.20 Bore dia 938 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 2.900" Hub dia 1.342 Notes USED ON 2 PCS SHAFT FOR SUBARU TO REPLACE THE CENTER CV SECTION Partn number 1204-241U Series 1251 Splines count 22/24 Splines dia 995 Style SR Through hole 1.300" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 3.312 Hub dia 1.445 Notes USED ON 2 PCS SHAFT FOR SUBARU TO REPLACE THE CENTER CVJ SECTION Partn number 1204-261U Series 1251 Splines count 24/26 Splines dia 1.115 Style SR Through hole 1.300" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 6.200" Hub dia 3.819 Partn number 131446KS Series SPL250 Splines count 49 Splines dia 2.544 Style BS Through hole 2.672 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 2.750" Hub dia 1.420" Notes FITS STUB: 1453-232 OR 3053-233 Partn number 1404-22 Series 1100 Splines count 22/23 Splines dia 0.990" Style SR Through hole 1.360" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 3.250" Hub dia 1.420" Notes FITS STUB: 1453-232 OR 3053-233 Partn number 1404-231 Series 1100 Splines count 22/23 Splines dia 0.990" Style SR Through hole 1.800" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 3.265 Hub dia 1.416 Notes USED ON MERKUR SHAFTS Partn number 1404-261 Series 1100 Splines count 26 Splines dia 1.129 Style SR Through hole 1.824 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 5.590" Hub dia 2.879 Notes COUPLING SHAFT YOKE Partn number 170-4-1271-1 Series SPL170 Splines count 46 Splines dia 2.390" Style BS Through hole 2.750" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
