3027-220 – Tri & Quad Prongs – Bolt Circle Dia 96MM – Butt Dia 1.813″ – Face To Weld 1.500

3027-220 Land Rover Discovery Tri Prong – 96MM Bolt Circle – 1.813" Butt Dia – 1.500" Face to Weld

The 3027-220 is a tri prong flange yoke for Land Rover Discovery applications with a 96MM bolt circle diameter. The bolt holes are 12MM clearance. The butt diameter measures 1.813" and the face-to-weld length is 1.500". The nose bushing diameter is 36MM. This unit welds to a 2.000" x 0.095" tube.

Specifications

• Part Number: 3027-220
• Application: Land Rover Discovery
• Bolt Circle Dia: 96MM
• Bolt Hole Dia: 12MM
• Bolt Hole Pilot Dia: N/A
• Nose Bushing Dia: 36MM
• Butt Dia: 1.813"
• Face to Weld: 1.500"
• Tube Dia x Wall: 2.000" x 0.095"

When fitting the 3027-220 on a Land Rover Discovery, confirm the driveshaft tube is 2.000" OD with 0.095" wall before welding — the heavier 0.095" wall and smaller tube diameter are specific to the Discovery driveshaft configuration. The 36MM nose bushing diameter is larger than the 31-32MM range seen on other prongs in this catalog; verify this against the Discovery transfer case output. The 1.813" butt diameter is dimensionally smaller than the 2.344" butt found on companion prongs with 96MM bolt circles. The Land Rover Discovery application requires this smaller butt and the 2.000" x 0.095" tube combination. Confirm both the butt diameter and tube specification against the existing driveshaft assembly before ordering.