2726-260 – Tri & Quad Prongs – Bolt Circle Dia 96MM – Butt Dia 2.344″ – Face To Weld 1.375

The 2726-260 is the conventional socket-style tri-prong yoke matching the Male Pin 2726-262 in bolt circle (96mm) and pilot (22mm) but using a 28mm nose bushing instead of 16mm. The 28mm bushing confirms this is a conventional prong socket that accepts pins from a spider or mating pin joint, while the 2726-262's 16mm bushing signals its inverted male-pin geometry.

The 10mm bolt holes at 96mm bolt circle with 22mm pilot represent a specific application not explicitly named in the catalog data. The dimensions overlap with several European and some Japanese RWD vehicles. At 2.344" butt and 2.500" OD tube with 0.083" wall, this is a mid-size application yoke.

The 22mm pilot distinguishes the 2726-260 from other 96mm prong yokes in the 2726 series that carry no pilot (N/A) or different pilot sizes. Verify the pilot bore diameter in your differential flange. If the flange has no pilot boss and registration relies only on bolts, you need a no-pilot yoke. If there is a boss that protrudes into the yoke bore, measure it and confirm 22mm.

All tri and quad prong yokes.