2687354000100 WELD YOKE 68735 / 2035 Series Weld Yoke – 100 x 3 mm

Building or rebuilding a 68735 series driveshaft means getting the weld yoke right first. The TY68735U weld yoke is machined for one tube diameter and one series — those two specs are non-negotiable. Get the butt diameter wrong and the weld joint is already compromised before you strike the arc.

Ty68735U Weld Yoke — Tube Fit & Steel Specs

The TY68735U weld yoke specs: fits 3.937 X 0.118 tube | 94.25" butt dia | 90" center-to-weld. Steel construction — DOM-compatible, full-penetration weld ready, standard for high-torque driveshaft applications. Center-to-weld dimension is critical for total shaft length calculations — it's the distance consumed by this yoke on that end of the tube.

Measure your tube OD before cutting and welding the TY68735U weld yoke. Tack it in place first, check runout is within 0.005" before committing to full weld. A slight off-angle tack that gets welded solid will show up as vibration at 50+ mph that no balancer can fully correct.

Key Features

• Series: 68735 — application-specific
• Tube fit: 3.937 X 0.118 — butt diameter is machined specifically for this OD
• Butt dia: 94.25" — must match tube OD precisely for a centered weld joint
• Center-to-weld: 90" — factors into total shaft length calculation
• Steel — DOM-compatible, full-penetration weld, standard drivetrain spec
• Brand: UDS

Specifications

• SKU: TY68735U
• Brand: UDS
• Series: 68735
• Material: Steel
• Tube Fit: 3.937 X 0.118
• Butt Dia: 94.25"
• Center to Weld: 90"