3104-262CV – End Yoke – 1310 Series – 1.146″ Splines Dia – 1.614″ Hub Dia
$85.40
1 in stock
11
People watching this product now!
Description
3104-262Cv End Yoke — 1310 series, 1.146 x 26 spline | 1.614″ hub dia | 3.000″” CJ-to-end | 1.500″ bore. Complete replacement, spline-specific fit. Count splines before ordering.
Full Description
That clunk under acceleration that goes away when you grab the driveshaft and check for play — it's usually here, at the end yoke splines. The 3104-262CV end yoke is the correct 1310 series replacement. Count the splines on your output shaft before ordering. Don't guess by series alone.
3104-262Cv End Yoke — Spline Specs & 1310 Series Fitment
The 1310 series covers light-duty trucks — F-150, Silverado 1500, Jeep Wrangler, Ram 1500. The 3104-262CV end yoke specs: 1.146 x 26 spline | 1.614" hub dia | 3.000"" CJ-to-end | 1.500" bore. CV CONVERSION YOKE, INCLUDES HUB SLEEVE. Hub diameter is the outer dimension that clears the axle housing or T-case bore. CJ-to-end determines how the u-joint positions relative to the flange or seal surface.
Count the splines on your output shaft — don't go by the vehicle model alone. Axle swaps and rebuilds can change the spline count from the original. The 3104-262CV end yoke is dimensioned for one spline specification; putting it on the wrong shaft will damage both the yoke and the shaft.
Key Features
- Series: 1310 — light-duty trucks — F-150, Silverado 1500, Jeep Wrangler, Ram 1500
- Spline: 1.146 x 26 — must match output shaft exactly
- Hub dia: 1.614" — outer dimension, verify clearance
- CJ-to-end: 3.000"" — positions u-joint relative to axle flange
- Bore: 1.500"
- Style: CV
- Brand: UDS
- Note: CV CONVERSION YOKE, INCLUDES HUB SLEEVE
Specifications
- SKU: 3104-262CV
- Brand: UDS
- Series: 1310
- Spline Dia: 1.146
- Spline Count: 26
- Hub Dia: 1.614"
- CJ to End: 3.000""
- Through Hole: 1.500"
- Style: CV
- Notes: CV CONVERSION YOKE, INCLUDES HUB SLEEVE
Additional information
| Cj to end |
3.000" |
|---|---|
| Hub dia |
1.614 |
| Notes |
CV CONVERSION YOKE, INCLUDES HUB SLEEVE ,DODGE & JEEP FRONT TRANSFER CASE |
| Partn number |
3104-262CV |
| Series |
1310 |
| Splines count |
26 |
| Splines dia |
1.146 |
| Style |
CV |
| Through hole |
1.500" |
More Parts from the same Category
Filters Sort results
Reset Apply
Image | Part # | Part Details | Price | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| End Yokes (145) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 2.50 Hub dia 2.25 Partn number 10-4-143 Bore dia 1.125 Bore type round Keyway GAP - 0.25 Brand UDS Splines count N/A Style ISR | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bore type round Cj to end 2.50 Hub dia 1.62 Keyway GAP - 0.25 Series 1000 Through hole 1.20 Bore dia 938 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 2.900" Hub dia 1.342 Notes USED ON 2 PCS SHAFT FOR SUBARU TO REPLACE THE CENTER CV SECTION Partn number 1204-241U Series 1251 Splines count 22/24 Splines dia 995 Style SR Through hole 1.300" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 3.312 Hub dia 1.445 Notes USED ON 2 PCS SHAFT FOR SUBARU TO REPLACE THE CENTER CVJ SECTION Partn number 1204-261U Series 1251 Splines count 24/26 Splines dia 1.115 Style SR Through hole 1.300" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 6.200" Hub dia 3.819 Partn number 131446KS Series SPL250 Splines count 49 Splines dia 2.544 Style BS Through hole 2.672 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 2.750" Hub dia 1.420" Notes FITS STUB: 1453-232 OR 3053-233 Partn number 1404-22 Series 1100 Splines count 22/23 Splines dia 0.990" Style SR Through hole 1.360" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 3.250" Hub dia 1.420" Notes FITS STUB: 1453-232 OR 3053-233 Partn number 1404-231 Series 1100 Splines count 22/23 Splines dia 0.990" Style SR Through hole 1.800" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 3.265 Hub dia 1.416 Notes USED ON MERKUR SHAFTS Partn number 1404-261 Series 1100 Splines count 26 Splines dia 1.129 Style SR Through hole 1.824 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 5.590" Hub dia 2.879 Notes COUPLING SHAFT YOKE Partn number 170-4-1271-1 Series SPL170 Splines count 46 Splines dia 2.390" Style BS Through hole 2.750" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 6.240" Hub dia 3.000" Partn number 170-4-281-1 Series SPL170 Splines count 39 Splines dia 2.024 Style BS Through hole 2.281 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
