170-4-1271-1 – End Yoke – 2.390″ splines dia – 2.879″ Hub Dia – 46 Spline
$254.88
0 in stock
10
People watching this product now!
Description
170-4-1271-1 End Yoke — SPL170 series, 2.390″ x 46 spline | 2.879″ hub dia | 5.590″” CJ-to-end | 2.750″ bore. Genuine replacement, spline-specific fit. Count splines before ordering.
Full Description
End yoke failures are usually easy to diagnose: cracked ears, worn splines, or corrosion at the cap bores. Whatever the cause, the 170-4-1271-1 end yoke is the direct replacement for SPL170 series applications. Spline count and shaft diameter both have to match — verify yours before ordering.
170-4-1271-1 End Yoke — Spline Specs & SPL170 Series Fitment
The 170-4-1271-1 end yoke specs: 2.390" x 46 spline | 2.879" hub dia | 5.590"" CJ-to-end | 2.750" bore. COUPLING SHAFT YOKE. Hub diameter is the outer dimension that clears the axle housing or T-case bore. CJ-to-end determines how the u-joint positions relative to the flange or seal surface. Count the splines on your output shaft — don't go by the vehicle model alone. Axle swaps and rebuilds can change the spline count from the original. The 170-4-1271-1 end yoke is dimensioned for one spline specification; putting it on the wrong shaft will damage both the yoke and the shaft.Key Features
- Series: SPL170 — application-specific
- Spline: 2.390" x 46 — must match output shaft exactly
- Hub dia: 2.879" — outer dimension, verify clearance
- CJ-to-end: 5.590"" — positions u-joint relative to axle flange
- Bore: 2.750"
- Style: BS
- Brand: UDS
- Note: COUPLING SHAFT YOKE
Specifications
- SKU: 170-4-1271-1
- Brand: UDS
- Series: SPL170
- Spline Dia: 2.390"
- Spline Count: 46
- Hub Dia: 2.879"
- CJ to End: 5.590""
- Through Hole: 2.750"
- Style: BS
- Notes: COUPLING SHAFT YOKE
Additional information
| Cj to end | 5.590″ |
|---|---|
| Hub dia | 2.879 |
| Notes | COUPLING SHAFT YOKE |
| Partn number | 170-4-1271-1 |
| Series | SPL170 |
| Splines count | 46 |
| Splines dia | 2.390″ |
| Style | BS |
| Through hole | 2.750″ |
More Parts from the same Category
Filters Sort results
Reset Apply
Image | Part # | Part Details | Price | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| End Yokes (145) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 2.50 Hub dia 2.25 Partn number 10-4-143 Bore dia 1.125 Bore type round Keyway GAP - 0.25 Brand UDS Splines count N/A Style ISR Series 1000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bore type round Cj to end 2.50 Hub dia 1.62 Keyway GAP - 0.25 Series 1000 Through hole 1.20 Bore dia 938 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 2.900" Hub dia 1.342 Notes USED ON 2 PCS SHAFT FOR SUBARU TO REPLACE THE CENTER CV SECTION Partn number 1204-241U Series 1251 Splines count 22/24 Splines dia 995 Style SR Through hole 1.300" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 3.312 Hub dia 1.445 Notes USED ON 2 PCS SHAFT FOR SUBARU TO REPLACE THE CENTER CVJ SECTION Partn number 1204-261U Series 1251 Splines count 24/26 Splines dia 1.115 Style SR Through hole 1.300" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 6.200" Hub dia 3.819 Partn number 131446KS Series SPL250 Splines count 49 Splines dia 2.544 Style BS Through hole 2.672 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 2.750" Hub dia 1.420" Notes FITS STUB: 1453-232 OR 3053-233 Partn number 1404-22 Series 1100 Splines count 22/23 Splines dia 0.990" Style SR Through hole 1.360" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 3.250" Hub dia 1.420" Notes FITS STUB: 1453-232 OR 3053-233 Partn number 1404-231 Series 1100 Splines count 22/23 Splines dia 0.990" Style SR Through hole 1.800" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 3.265 Hub dia 1.416 Notes USED ON MERKUR SHAFTS Partn number 1404-261 Series 1100 Splines count 26 Splines dia 1.129 Style SR Through hole 1.824 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 6.240" Hub dia 3.000" Partn number 170-4-281-1 Series SPL170 Splines count 39 Splines dia 2.024 Style BS Through hole 2.281 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 5.320" Hub dia 2.938 Partn number 170-4-361-1 Series SPL170 Splines count 41 Splines dia 2.143 Style BS Through hole 2.500" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
