905747-1 – Driveshaft – 1410 (1.188 x 4.188) Series – 8.730″ Flange To Flange – 5.350″ Cl To Cl

905747-1 1410 Series Short Couple Driveshaft 8.730" Flange to Flange

The 905747-1 is a 1410 series short couple driveshaft measuring 8.730" flange-to-flange and 5.350" centerline-to-centerline. The 1410 series is defined by 1.188" cap diameter trunnions on a 4.188" span.

Specifications

• Part Number: 905747-1
• Series: 1410 (1.188" x 4.188")
• Flange to Flange: 8.730"
• CL to CL: 5.350"

When fitting the 905747-1, verify the installed flange-to-flange gap is 8.730" with both companion flanges seated. The 3.380" differential between F-to-F and CL-to-CL reflects the flange yoke CJ-to-flat geometry at both ends. Both end flanges must accept 1410 series U-joint cap bores (1.188" diameter).

The 905747-1 is a single-suffix unit in its part number family, indicating it is the only available length configuration for this specific flange combination. The 8.730" F-to-F and 5.350" CL-to-CL are non-standard increments compared to the other 1410-series units — measure both dimensions precisely before ordering to confirm the 905747-1 matches your application.