8134-SF Short Couple 1410 Series , Flange TO Flange Collapsed 9.625″ , CL TO CL: 6.250″

8134-SF 1410 Series Short Couple Driveshaft 9.500" Flange to Flange

The 8134-SF is a 1410 series short couple driveshaft with a 9.500" flange-to-flange length and 6.120" centerline-to-centerline dimension. The 1410 series uses 1.188" cap diameter trunnions on a 4.188" span — above 1350 in the SAE torque hierarchy.

Specifications

• Part Number: 8134-SF
• Series: 1410
• Flange to Flange: 9.500"
• CL to CL: 6.120"

When fitting the 8134-SF, confirm the installed flange-to-flange gap is 9.500" with both companion flanges fully seated. The product name references a "collapsed" F-to-F of 9.625" — the 9.500" attribute is the working installed measurement. Verify which measurement applies to your installation method. Both end flanges must accept 1410 series U-joint cap bores (1.188" diameter).

The "SF" suffix in the 8134-SF designates a short couple with flanged ends. The 3.380" differential between F-to-F and CL-to-CL reflects the flange yoke CJ-to-flat geometry at both ends. The 1410 series (1.188" cap) is dimensionally distinct from the 1310 (1.062") and 1480 (1.375") series — confirm the series before ordering.