202990-1 – Driveshaft – 1480 (1.375 x 4.188) Series – 8.500″ Flange To Flange – 5.500″ Cl To Cl

202990-1 1480 Series Short Couple Driveshaft 8.500" Flange to Flange

The 202990-1 is a 1480 series short couple driveshaft with an 8.500" flange-to-flange length and 5.500" centerline-to-centerline dimension. This is the shortest unit in the 202990 1480-series family. The 1480 series uses 1.375" cap diameter trunnions on a 4.188" span.

Specifications

• Part Number: 202990-1
• Series: 1480 (1.375" x 4.188")
• Flange to Flange: 8.500"
• CL to CL: 5.500"

When fitting the 202990-1, measure the installed flange-to-flange gap and confirm it is 8.500" with both companion flanges fully seated. The 3.000" differential between F-to-F and CL-to-CL is the smallest in the 202990 series, indicating specific flange yoke CJ-to-flat geometry. Both end flanges must accept 1480 series U-joint cap bores (1.375" dia, 4.188" span).

The 202990-1 is the shortest available unit at 8.500" F-to-F. If your application requires CL-to-CL measurement only, also check the 908167-series 1480 units which are available with CL-to-CL data at 5.500" without F-to-F references. Confirm which measurement method applies to your installation before ordering the 202990-1.