212134-1X Drive Shaft Center Bearing 1.771 X 2.250 X 7.622 SPL100
$57.99
10 in stock
Description
212134-1X center support bearing for SPL100 series driveshaft applications. Bearing ID 1.771″, mount hole center-to-center 7.622″, center-to-base 2.689″, bracket width 2.250″. Heavy commercial truck series — verify stub shaft OD matches 1.771″.
Full Description
212134-1X -- SPL100 Series Center Support Bearing, 1.771" ID, 7.622" Mount Spacing
The SPL100 is a heavy-duty commercial driveshaft series, rated well above the 1610 and 1710 light-heavy series used in Class 4-5 trucks. The 212134-1X is the center support bearing for two-piece SPL100 driveshafts, carrying the midship stub shaft at the junction between the front and rear sections. Two dimensions control fitment: the bearing inner bore (1.771 inches) and the frame bracket mount hole spacing (7.622 inches center-to-center).
The 7.622-inch C-to-C mount spacing is wider than the 5.875-inch spacing on light-duty Ford center bearings -- this is a commercial-grade assembly designed for the wider crossmembers found on Class 5-8 trucks. Center-to-base dimension: 2.689 inches. Bracket width: 2.250 inches. These determine the bearing's installed height relative to the frame and the lateral clearance required for the carrier.
- Part Number: 212134-1X
- Application: SPL100 series driveshafts
- Bearing ID: 1.771"
- Mount Hole C-to-C: 7.622"
- Center to Base: 2.689"
- Bracket Width: 2.250"
Inspect the rubber isolator for cracking or oil saturation at every service interval -- a degraded isolator on a commercial truck transmits driveshaft NVH directly to the cab at highway speed. Full Center Support Bearing catalog for light and heavy series.
Additional information
| Application | SPL100 |
|---|---|
| Bearing id | 1.771 |
| Center bearing to base | 2.689 |
| Ctr to ctr of mount holes | 7.622 |
| Partn number | 212134-1X |
| Bracket wid | 2.250 |
More Parts from the same Category
Filters Sort results
Reset Apply
Image | Part # | Part Details | Price | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Center Support Bearing (323) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Application Nissan Bearing id 1.181 Center bearing to base 2.375 Ctr to ctr of mount holes 0 Notes 620 Pickup (73-79) Partn number 1280-10 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Application Nissan Juke 11-17 Bearing id 1.181 Center bearing to base 570 Ctr to ctr of mount holes 7.125 Notes Bolt heads opposite side of spacers Partn number 1280-15 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Application Nissan Bearing id 1.181 Center bearing to base 2.375 Ctr to ctr of mount holes 9.375 Notes Pickup 4X4 (79-88) Partn number 1280-20 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Application Nissan, Infiniti Bearing id 1.181 Center bearing to base 2.170 Ctr to ctr of mount holes 6.000 Notes Double metal rings surrounding the rubber and bearing. Comes with nut and washer/spacer Partn number 1280-30 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Application Nissan Bearing id 1.378 Center bearing to base 2.180 Ctr to ctr of mount holes 0 Notes Infiniti/ Nissan. Like 1280-30 but with larger bearing ID / Bracket not included. comes with new nut washer/spacer Partn number 1280-35 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Application Nissan Bearing id 1.181 Center bearing to base 2.500 Ctr to ctr of mount holes 6.000 Notes Nissan / Infiniti / Frontier 4X4 (98-03) Hardbody 4X4 (86-97) Pathfinder 4X4 (87-03) Xterra 4X4 (00-03) QX4 4X4 (00-03) Partn number 1280-40 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Application Nissan Bearing id 1.181 Center bearing to base 2.125 Ctr to ctr of mount holes 5.875 Notes 300ZX (90-96) Partn number 1280-50 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Application Infiniti Bearing id 1.181 Center bearing to base 1.125 Ctr to ctr of mount holes 6.000 Notes Q45 (90-96) Partn number 1280-70 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Application INFINITI Q50, Q60 Bearing id 1.181 Ctr to ctr of mount holes 6.000 Notes 3 mm spacer Partn number 1280-74 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Application INFINITI Q50, Q60, Q70, M37, M56 Bearing id 1.181 Center bearing to base 197 Ctr to ctr of mount holes 6.000 Notes 11 mm spacer Partn number 1280-75 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
