3104-264 – End Yoke – 26 x 1.146″ Splines – 3.000″ Cj To End – 1.453″ Hub Dia – Partn Number 3104-264
$43.40
11 in stock
19
People watching this product now!
Description
3104-264 1310 series strap-style midship end yoke for GM 8.2-inch axle and multiple GM applications. 26 splines at 1.146″ diameter, 3.000″ CJ-to-end, 1.453″ hub, 1.469″ through-hole. Confirm 26-spline 1.146″ shaft before ordering.
Full Description
3104-264 -- 1310 Midship End Yoke for GM 8.2-Inch Axle, 26x1.146" Spline
The GM 8.2-inch rear axle (used across multiple mid-size and half-ton GM truck and van platforms) uses a 26-spline pinion shaft at 1.146-inch diameter -- a smaller, finer-spline specification than the 1350/1410 series yokes used on heavier GM applications. The 3104-264 is the 1310 strap-style end yoke for this shaft. It also fits several other GM applications catalogued with the same 26-spline, 1.146-inch shaft geometry.
Strap retention (BS style): the U-joint caps are bolted in place with strap brackets, not snap rings. Hub diameter is 1.453 inches, through-hole bore is 1.469 inches. CJ-to-end runs 3.000 inches exactly. The 1310 ears take a 1.062-inch cap strap-type U-joint.
- Part Number: 3104-264
- Series: 1310, strap retention
- Application: GM 8.2" axle, multiple GM platforms
- Splines: 26 x 1.146" diameter
- CJ to End: 3.000"
- Hub Diameter: 1.453"
- Through-Hole: 1.469"
Browse End Yokes for GM 8.2, 8.5, 9.5-inch axles and all spline configurations.
Additional information
| Cj to end | 3.000″ |
|---|---|
| Hub dia | 1.453 |
| Notes | GM 8.2, Midship end yoke used on multiple applications. |
| Partn number | 3104-264 |
| Series | 1310 |
| Splines count | 26 |
| Splines dia | 1.146 |
| Style | BS |
| Through hole | 1.469 |
More Parts from the same Category
Filters Sort results
Reset Apply
Image | Part # | Part Details | Price | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| End Yokes (146) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bore type splined Cj to end 2.50 Hub dia 1.62 Keyway N/A Series 1000 Through hole 1.20 Bore dia 1.125 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 2.50 Hub dia 2.25 Partn number 10-4-143 Bore dia 1.125 Bore type round Keyway GAP - 0.25 Brand UDS Splines count N/A Style ISR Series 1000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bore type round Cj to end 2.50 Hub dia 1.62 Keyway GAP - 0.25 Series 1000 Through hole 1.20 Bore dia 938 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 2.900" Hub dia 1.342 Notes USED ON 2 PCS SHAFT FOR SUBARU TO REPLACE THE CENTER CV SECTION Partn number 1204-241U Series 1251 Splines count 22/24 Splines dia 995 Style SR Through hole 1.300" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 3.312 Hub dia 1.445 Notes USED ON 2 PCS SHAFT FOR SUBARU TO REPLACE THE CENTER CVJ SECTION Partn number 1204-261U Series 1251 Splines count 24/26 Splines dia 1.115 Style SR Through hole 1.300" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 6.200" Hub dia 3.819 Partn number 131446KS Series SPL250 Splines count 49 Splines dia 2.544 Style BS Through hole 2.672 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 2.750" Hub dia 1.420" Notes FITS STUB: 1453-232 OR 3053-233 Partn number 1404-22 Series 1100 Splines count 22/23 Splines dia 0.990" Style SR Through hole 1.360" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 3.250" Hub dia 1.420" Notes FITS STUB: 1453-232 OR 3053-233 Partn number 1404-231 Series 1100 Splines count 22/23 Splines dia 0.990" Style SR Through hole 1.800" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 3.265 Hub dia 1.416 Notes USED ON MERKUR SHAFTS Partn number 1404-261 Series 1100 Splines count 26 Splines dia 1.129 Style SR Through hole 1.824 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Cj to end 5.590" Hub dia 2.879 Notes COUPLING SHAFT YOKE Partn number 170-4-1271-1 Series SPL170 Splines count 46 Splines dia 2.390" Style BS Through hole 2.750" | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
