10-1707 – End Yoke – 1000 Series – 1.62″ Hub Dia – Bore Dia 875

10-1707 1000 Series PTO End Yoke

The 10-1707 is a 1000 series PTO end yoke with a square bore configuration. The bore diameter measures 0.875" with a hub diameter of 1.62". This yoke has no keyway (keyway value: 0), and the CJ-to-end dimension is 1.69". Through hole diameter is 0.94".

Specifications

• Part Number: 10-1707
• Series: 1000
• Bore Type: Square
• Bore Diameter: 0.875"
• Hub Diameter: 1.62"
• Keyway: None
• CJ to End: 1.69"
• Through Hole: 0.94"

When fitting the 10-1707, verify the PTO shaft has a square profile measuring 0.875" across flats. Torque transfer relies entirely on the square bore geometry — there is no keyway. The CJ-to-end of 1.69" is notably shorter than many 1000 series yokes; confirm available shaft length before installation.

The 10-1707 is distinguished by its shorter CJ-to-end (1.69" versus the more common 2.50") and a smaller through hole of 0.94". Applications with limited shaft protrusion may require this shorter configuration. Confirm both the square bore dimension and the through hole clearance requirement for any locking hardware.