2880-32 – Center Support Bearing – Dodge Application – 1.181″ ID – 3.060″ Center Bearing To Base
$74.53
Out of stock
Description
Dodge application center support bearing with 1.181″ bore and 3.060″ center-to-base height; tall rubber-isolated ball bearing assembly for Dodge two-piece driveshaft elevated hanger.
Full Description
Q: What Dodge models use the 2880-32 with the 3.060" bracket height? A: The 2880-32 serves Dodge applications where the center hanger bracket drops 3.060" from the crossmember face to the driveshaft centerline. This tall-bracket geometry is used on Dodge full-size platforms with specific frame crossmember positioning. Confirm the model and year before ordering -- Dodge Durango, Ram, and Charger/Challenger RWD platforms all use different center bearing heights.
Q: My Dodge vibrates after installing a new center bearing. The height was wrong by 0.5". How bad is this? A: A 0.5" height error at the center bearing location produces a propshaft angle deviation of approximately 0.5--1.5 degrees depending on driveshaft length, which will create a noticeable second-order vibration at highway speed. The bearing must be replaced with the correct 3.060" unit.
Q: Is there a Spicer or Mopar cross-reference for the 2880-32 center support bearing? A: Mopar cross-references in the 52105945AA and 68033950AA families may apply depending on the specific Dodge platform and year. Spicer equivalent numbers in the 2-26 series may also apply. Confirm via the Mopar TOPIX parts catalog using your VIN for the most accurate cross-reference.
Q: My Dodge vibrates after installing a new center bearing. The height was wrong by 0.5". How bad is this? A: A 0.5" height error at the center bearing location produces a propshaft angle deviation of approximately 0.5--1.5 degrees depending on driveshaft length, which will create a noticeable second-order vibration at highway speed. The bearing must be replaced with the correct 3.060" unit.
Q: Is there a Spicer or Mopar cross-reference for the 2880-32 center support bearing? A: Mopar cross-references in the 52105945AA and 68033950AA families may apply depending on the specific Dodge platform and year. Spicer equivalent numbers in the 2-26 series may also apply. Confirm via the Mopar TOPIX parts catalog using your VIN for the most accurate cross-reference.
Additional information
| Application | DODGE |
|---|---|
| Bearing id | 1.181 |
| Center bearing to base | 3.060 |
| Ctr to ctr of mount holes | 7.375 |
| Notes | Dodge Challenger CB |
| Partn number | 2880-32 |
More Parts from the same Category
Filters Sort results
Reset Apply
Image | Part # | Part Details | Price | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Center Support Bearing (323) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Application Nissan Bearing id 1.181 Center bearing to base 2.375 Ctr to ctr of mount holes 0 Notes 620 Pickup (73-79) Partn number 1280-10 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Application Nissan Juke 11-17 Bearing id 1.181 Center bearing to base 570 Ctr to ctr of mount holes 7.125 Notes Bolt heads opposite side of spacers Partn number 1280-15 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Application Nissan Bearing id 1.181 Center bearing to base 2.375 Ctr to ctr of mount holes 9.375 Notes Pickup 4X4 (79-88) Partn number 1280-20 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Application Nissan, Infiniti Bearing id 1.181 Center bearing to base 2.170 Ctr to ctr of mount holes 6.000 Notes Double metal rings surrounding the rubber and bearing. Comes with nut and washer/spacer Partn number 1280-30 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Application Nissan Bearing id 1.378 Center bearing to base 2.180 Ctr to ctr of mount holes 0 Notes Infiniti/ Nissan. Like 1280-30 but with larger bearing ID / Bracket not included. comes with new nut washer/spacer Partn number 1280-35 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Application Nissan Bearing id 1.181 Center bearing to base 2.500 Ctr to ctr of mount holes 6.000 Notes Nissan / Infiniti / Frontier 4X4 (98-03) Hardbody 4X4 (86-97) Pathfinder 4X4 (87-03) Xterra 4X4 (00-03) QX4 4X4 (00-03) Partn number 1280-40 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Application Nissan Bearing id 1.181 Center bearing to base 2.125 Ctr to ctr of mount holes 5.875 Notes 300ZX (90-96) Partn number 1280-50 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Application Infiniti Bearing id 1.181 Center bearing to base 1.125 Ctr to ctr of mount holes 6.000 Notes Q45 (90-96) Partn number 1280-70 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Application INFINITI Q50, Q60 Bearing id 1.181 Ctr to ctr of mount holes 6.000 Notes 3 mm spacer Partn number 1280-74 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Application INFINITI Q50, Q60, Q70, M37, M56 Bearing id 1.181 Center bearing to base 197 Ctr to ctr of mount holes 6.000 Notes 11 mm spacer Partn number 1280-75 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
