Brand:
3502-0145 UDS Flange Yoke 1350 Series – Aluminum 6061-T6 Tri Flange
$136.89
10 in stock
14
People watching this product now!
Description
3502-0145U Flange Yoke — 1350 series, 4.134 bolt circle | 0.551 pilot | 6×0.559 bolt holes | 3.000″ CJ-to-flat. Complete bolt-on replacement. Verify bolt circle and pilot before ordering.
Full Description
Replacing a worn or damaged flange yoke starts with getting the right part. The 3502-0145U flange yoke is dimensioned for one bolt circle, one pilot diameter, and one drivetrain series — 1350 series. A mismatched bolt circle means the yoke won't seat flat. A wrong pilot means the driveshaft runs off-center. The 3502-0145U flange yoke removes both risks.
3502-0145U Flange Yoke — 1350 Series Specifications & Fitment
The 1350 series covers 3/4-ton trucks — F-250, Ram 2500, Dana 44/60 axles, performance 4x4. The 3502-0145U flange yoke specs: 4.134 bolt circle | 0.551 pilot | 6x0.559 bolt holes | 3.000" CJ-to-flat. Aluminum 6061-T6 Tri Flange, 105mm (4.134) and 110mm (4.331) bolt circle spacing, 14mm bolt holes, 14mm nose hole, GM apps. Hole to hole: 105mm BC = 3.580", 110mm BC = 3.750". Pilot diameter is what centers the yoke on the companion flange — that dimension must match exactly or the driveshaft will run off-center at speed. Bolt circle determines your hole pattern match.
Before ordering the 3502-0145U flange yoke, measure your diff flange bolt circle and pilot diameter directly. Don't rely on series designation alone — after an axle swap, the flange dimensions may differ from the original factory spec. Brand: UDS. Verify, then order.
Key Features
- Series: 1350 — built for 3/4-ton trucks — F-250, Ram 2500, Dana 44/60 axles, performance 4x4
- Bolt circle: 4.134 — must match axle/diff flange hole pattern exactly
- Pilot dia: 0.551 — centers yoke on companion flange, no play allowed
- 6 bolt holes at 0.559 — verify hole count and size
- CJ-to-flat: 3.000" — affects driveshaft working angle clearance
- Brand: UDS — direct-fit replacement
- Note: Aluminum 6061-T6 Tri Flange, 105mm (4.134) and 110mm (4.331) bolt circle spacing, 14mm bolt holes, 14mm nose hole, GM apps. Hole to hole: 105mm BC = 3.580", 110mm BC = 3.750"
Specifications
- SKU: 3502-0145U
- Brand: UDS
- Series: 1350
- Bolt Circle: 4.134
- Pilot Dia: 0.551
- Bolt Holes: 6
- Bolt Hole Dia: 0.559
- CJ to Flat: 3.000"
- Notes: Aluminum 6061-T6 Tri Flange, 105mm (4.134) and 110mm (4.331) bolt circle spacing, 14mm bolt holes, 14mm nose hole, GM apps. Hole to hole: 105mm BC = 3.580", 110mm BC = 3.750"
Additional information
| Partn number |
3502-0145 |
|---|---|
| Pilot dia |
0.551 |
| Bolt circle dia |
4.134 |
| Bolt hole dia |
0.559 |
| Series |
1350 |
| Brand |
UDS |
| Notes |
Aluminum 6061-T6 Tri Flange, 105mm (4.134) and 110mm (4.331) bolt circle spacing, 14mm bolt holes, 14mm nose hole, GM apps. Hole to hole: 105mm BC = 3.580", 110mm BC = 3.750" |
| Bolt Holes |
6 |
| Cj to flat |
3.000 |
More Parts from the same Category
Filters Sort results
Reset Apply
Image | Part # | Part Details | Price | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flange Yokes (241) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Partn number 10-2-29 Series 1000 Pilot dia 2.250 Bolt circle dia 2.750 Bolt hole dia 4 Brand SPICER Notes Rec Bolt Pattern Bolt Holes 4 Cj to flat 1.562 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bolt circle dia 3.200 Bolt hole dia 0.411 Cj to flat 1.125 Partn number 1102-191 Pilot dia 1.968 ⋅ M Series ATV Bolt Holes 4 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bolt circle dia 3.576 Bolt hole dia 0.471 Cj to flat 1.625 Partn number 1202-077 Pilot dia 1.899-F Series 1251 Bolt Holes 4 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Pilot dia 1.811 Partn number 1202-181 Bolt Holes 4 Bolt hole dia 0.400 Series 1251 Bolt circle dia 3.200 Cj to flat 1.625 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bolt circle dia 3.550 Bolt hole dia 0.425 Cj to flat 1.625 Partn number 1202-196 Pilot dia 1.968-M Series 1251 Bolt Holes 4 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bolt circle dia 2.950 Bolt hole dia 0.395 Cj to flat 1.900 Partn number 1202-20 Pilot dia 1.968-M Series 1251 Bolt Holes 4 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bolt circle dia 3.555 Bolt hole dia 0.427 Cj to flat 1.750 Partn number 1202-201 Pilot dia 1.991-F Series 1251 Bolt Holes 4 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bolt circle dia 3.200 Bolt hole dia 0.406 Cj to flat 1.750 Partn number 1202-21 Pilot dia 1.968-M Series 1251 Bolt Holes 4 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bolt circle dia 3.347 Bolt hole dia 0.407 Cj to flat 1.625 Partn number 1202-237 Pilot dia 2.375-M Series 1251 Bolt Holes 4 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bolt circle dia 2.750 Bolt hole dia 0.323 Cj to flat 1.375 Partn number 1202-252 Pilot dia 2.248-M Series 1251 Bolt Holes 4 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
