2526-960 – Tri & Quad Prongs – Bolt Circle Dia 96MM – Butt Dia 2.344″ – Face To Weld 1.500

The 2526-960 is a threaded-hole (THRD 10x1.5) tri-prong yoke on a 96mm bolt circle. The M10 x 1.5mm-pitch thread is the standard metric coarse thread for M10 fasteners. On this yoke, the bolts thread directly into the yoke rather than passing through clearance holes. This configuration requires that the mating differential housing has clearance through-holes or a gap for the bolt heads.

The 22mm pilot at 96mm BC provides positive registration for concentricity. The 31mm nose bushing diameter matches the heavier bushing spec seen on larger-vehicle prong yokes, providing additional bearing surface versus the 28mm used on BMW applications.

The 31mm bushing combined with a 96mm bolt circle and threaded M10x1.5 holes is a specific combination that occurs on a narrower range of applications than the more common clearance-hole variants. No specific vehicle application is noted in the catalog data; if this part matches your differential flange dimensions, it is the correct part. Confirm all three: bolt circle, hole type (threaded vs clearance), and pilot size.

Browse tri and quad prong yokes.