BW6A – Balance Weigths – Notes Aluminum 27.4 Gram / .97oz – Weight 0.97

The BW6A balance weight is used in dynamic driveshaft balancing — placed on the tube surface at the specific angular position and distance from the tube end determined by the balancer reading. Weight: 0.97 oz. Aluminum 27.4 Gram / .97oz H shape with hole in center, Box 50. The BW6A balance weight is a steel round with center hole for tack-weld attachment.

Bw6A Balance Weight — Dynamic Balance Specs

Dynamic balance procedure with the BW6A balance weight: run shaft at 250-500 RPM, mark heavy spot, position weight 180 degrees opposite. Tack weld, recheck at operating speed. Steel construction, consistent weight per unit.

Don't stack multiple balance weights at the same location — space them angularly if multiple weights are needed. The BW6A balance weight is sized for standard driveshaft tube attachment.

Key Features

• Weight: 0.97 oz
• Note: Aluminum 27.4 Gram / .97oz H shape with hole in center, Box 50
• Brand: UDS

Specifications

• SKU: BW6A
• Brand: UDS
• Weight: 0.97
• Notes: Aluminum 27.4 Gram / .97oz H shape with hole in center, Box 50