3-82-261 – Yoke Shafts – 1410 Series – 1.750″ Splines Dia – 16 Spline

The 3-82-261 yoke shaft is an integrated assembly — splined shaft on one end, u-joint yoke on the other. It splines onto the output shaft and carries the u-joint cross simultaneously, in one part. For 1410 series applications, both the spline specification and the u-joint series have to be correct. One wrong dimension on either end and the part doesn't work.

3-82-261 Yoke Shaft — 1410 Series Spline & CL Specs

The 1410 series covers HD trucks — F-250/350/450, Ram 2500/3500, Dana 60/70 axles. The 3-82-261 yoke shaft specs: 1.750" x 16 spline | 1.438" spline length | 4.547" CL-to-end. Spline length determines engagement depth — short engagement under high torque loads damages the output shaft, not just the yoke shaft. CL-to-end positions the u-joint cross relative to the output shaft face; this affects clearance on tight installations.

Verify both ends of the 3-82-261 yoke shaft before installing: spline count against the output shaft, and series cross size against the driveshaft u-joint. If either is wrong, the part has to come back out. Measure once, order correctly.

Key Features

• Series: 1410 — HD trucks — F-250/350/450, Ram 2500/3500, Dana 60/70 axles
• Spline: 1.750" x 16 — must match output shaft exactly
• Spline length: 1.438" — full engagement required
• CL-to-end: 4.547" — u-joint position from output shaft face
• Integrated design — splined shaft and u-joint yoke in one piece
• Brand: UDS

Specifications

• SKU: 3-82-261
• Brand: UDS
• Series: 1410
• Spline Dia: 1.750"
• Spline Count: 16
• Spline Length: 1.438"
• CL to End: 4.547"