1301-231 – Companion Flanges – 23 Splines – 0.990″ Splines Dia – 1.500″ Hub Dia
$47.58
10 in stock
14 People watching this product now!
Description
1301-231 UDS flange yoke. 4-hole, 3.340″ bolt circle, 1.808″ pilot, ” CJ-to-face. Verify bolt circle and pilot before ordering.
Full Description
1301-231 UDS Flange Yoke
The 1301-231 is a series flange yoke manufactured by UDS. It bolts to a companion flange on the transmission, transfer case, or differential output using a 4-bolt pattern on a 3.340-inch bolt circle. The 1.808-inch pilot diameter registers the yoke concentrically against the companion flange to minimize runout.
The 4 bolt holes are -inch diameter on the 3.340-inch bolt circle. The center-U-joint-to-flange-face dimension is inches. This series yoke accepts a U-joint in the yoke ears — the ear bore is machined specifically for the cap diameter. Application note: Toyota Mid-ship, SQ.
Specifications
- Part Number: 1301-231
- Brand: UDS
- Splines count: 23
- Splines dia: 0.990"
- Hub dia: 1.500"
- Through hole: 1.530
- Pilot dia: 1.808
- Bolt circle dia: 3.340
- Face to end: 2.234
- Notes: Toyota Mid-ship, SQ
- Bolt Holes: 4
Fitment & Installation Notes
Before ordering the 1301-231, measure the bolt circle diameter and pilot diameter on the companion flange. The bolt circle (3.340") and pilot (1.808") must match exactly. A U-joint is required — do not install a different-series joint in these ears.
Browse the complete Companion Flanges catalog including circular and rectangular bolt patterns across and adjacent series.
Additional information
| Partn number | 1301-231 |
|---|---|
| Splines count | 23 |
| Splines dia | 0.990″ |
| Hub dia | 1.500″ |
| Through hole | 1.530 |
| Pilot dia | 1.808 |
| Bolt circle dia | 3.340 |
| Face to end | 2.234 |
| Notes | Toyota Mid-ship, SQ |
| Bolt Holes | 4 |
More Parts from the same Category
Filters Sort results
Reset Apply
Image | Part # | Part Details | Price | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Companion Flanges (24) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Bolt circle dia 3.386 Hub dia 1.495 Notes Uses 2352-1001 (plunge) Partn number 1301-232 Pilot dia 3.937 Splines count 23 Splines dia 990 Through hole 1.540 Bolt Holes 6 Face to end 3.170 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Brand UDS Partn number 2-1-1313-4 Pilot dia 2.375 Bolt circle dia 3.125 Bore dia 1.250 Keyway 0.312 Outside dia 3.875 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Bolt circle dia 4.250 Hub dia 1.875 Notes Dana 60, 70 Pinion Conversion Flange Partn number 2010948 Pilot dia 2.000 Splines count 29 Splines dia 1.276 Through hole 1.500 Bolt Holes 8 Face to end 2.000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Bolt circle dia 100mm Hub dia 1.848 Notes Pinion Tri-Flange V6 12/18 Bolt hole Partn number 2801-301 Pilot dia 0 Splines count 30 Splines dia 1.250 Through hole 1.000 Bolt Holes 3/86 mm bolt to bolt Face to end 2.200 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Bolt circle dia 4.250 Hub dia 1.943 Notes Front 2007-2017 JEEP JK T-case Adapter Partn number 3-1-32JK Pilot dia 2.000 Splines count 32 Splines dia 1.401 Through hole 2.000 Bolt Holes 4 Face to end 3.810 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Bolt circle dia 4.250 Hub dia 1.943 Notes Rear 2007-2017 JEEP JK T-case Adapter Partn number 3-1-32R Pilot dia 2.000 Splines count 32 Splines dia 1.401 Through hole 2.000 Bolt Holes 4 Face to end 2.530 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Bolt circle dia 3.386 Hub dia 1.554 Notes Uses 2352-1001 (plunge) Partn number 3101-262 Pilot dia 3.937 Splines count 26 Splines dia 1.146 Through hole 1.535 Bolt Holes 6 Face to end 3.170 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Bolt circle dia 3.386 Hub dia 1.450" Notes Uses 2352-1001 (plunge) Partn number 3101-262M Pilot dia 3.937 Splines count 26 Splines dia 1.146 Through hole 1.535 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Bolt circle dia 3.386 Hub dia 1.400 Notes Uses 2352-1001 (plunge) Partn number 3101-262M2 Pilot dia 3.937 Splines count 26 Splines dia 1.146 Through hole 1.535 Bolt Holes 6 Face to end 3.170 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Bolt circle dia 3.50/4.250 Hub dia 1.812 Notes Dual bolt pattern Partn number 3101-282 Pilot dia 2.000 Splines count 28 Splines dia 1.218 Through hole 1.252 Bolt Holes 8 Face to end 1.985 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
