Brand:
UJ68755UL Universal Joint 68755 / 58742 / 2055 Series , 57mm x 152mm SEALED NON GREASEABLE SOLID
$59.06
+50 in stock
10
People watching this product now!
Description
UJ68755UL — 2055 series, 2.244″ cap, 5.984″ width. Premium sealed universal joint. Verify cap dia and snap ring style before ordering.
Full Description
The uj68755ul is a 2055 series outside snap ring retention universal joint measuring 2.244" cap dia | 5.984" width. The uj68755ul is sealed, no grease fitting required. Every uj68755ul is verified for cap diameter, bearing width, and snap ring groove dimensions before it ships from Universal Driveshafts.
UJ68755UL -- 2055 Series Cap & Width Specifications
The it specs: 2.244" cap dia | 5.984" width. Cap diameter determines which yoke bore it fits -- the cap must seat fully into the yoke without play. Bearing width (5.984" across the body) controls the span between yoke ears. A cross that is too wide won't fit; too narrow and the snap rings don't seat in the groove. 57X152.
Verify the yoke bore diameter against the this unit cap size before installing. The snap ring style (outside snap ring retention) must match the yoke groove pattern -- OSR yokes have an external groove; ISR yokes have an internal groove. The the assembly is factory-sealed -- no maintenance interval, no grease fitting. Correct installation torque on the strap kit or U-bolt is critical -- undertorqued straps allow the cap to walk under load.
Installation Notes for this u-joint
Before installing the it, clean the yoke bores of any rust, burrs, or old bearing material. The bearing cups must drop in by hand -- never drive them in with a hammer directly on the cup. Use a proper cross-and-bearing installation tool or a press. Driving a cup in at an angle cocks the needle bearings and destroys the the part before it ever sees load.
After installation, verify full rotation without binding. A binding cross indicates a cup is cocked or seated too deep. The this component should articulate freely through the full operating angle of your driveshaft before the vehicle is lowered off the lift.
Key Features
- Series: 2055 series
- Cap dia: 2.244" -- must match yoke bore exactly
- Width: 5.984" -- controls yoke ear span
- Style: outside snap ring retention -- verify yoke groove type before ordering
- Sealed -- factory pre-lubed, no maintenance required
- Part number: J68755XU
- Brand: UDS
- Note: 57X152
Specifications
- SKU: This u-joint
- Part Number: J68755XU
- Brand: UDS
- Series: 2055
- Cap Dia 1: 2.244"
- Width 1: 5.984"
- Snap Ring Style: OSR
- Lube: No -- sealed
- Notes: 57X152
Additional information
| Brand |
UDS |
|---|---|
| Cap dia 1 |
2.244 |
| Lube |
N |
| Notes |
57X152 ,SEALED HD |
| Partn number |
J68755XU |
| Series |
2055 |
| Style |
OSR |
| Width 1 |
5.984 |
More Parts from the same Category
Filters Sort results
Reset Apply
Image | Part # | Part Details | Price | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Univeral Joints (218) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Series 1500 Style BP Cap dia 1 1.560 Width 1 4.550 Lube Yes Brand UDS Notes comes with hardware | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Brand SPICER Cap dia 1 1.625 Cap dia 2 1.938 Lube Y Notes OSR/ WB MECH 1650X7C Partn number 5-330X Series 1650X7C Style COMBO Width 1 5.594 Width 2 5.531 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Brand UDS Cap dia 1 1.625 Cap dia 2 1.938 Lube Y Notes OSR/ WB MECH 1650X7C Partn number 5-330XU Series 1650X7C Style COMBO Width 1 5.594 Width 2 5.844 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Brand SPICER Cap dia 1 1.188 Cap dia 2 1.438 Lube Y Notes MECH - 4C X 1410 Partn number 5-345X Series 1410 X 4 C Style COMBO Width 1 4.188 Width 2 4.250 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Brand UDS Cap dia 1 1.188 Cap dia 2 1.438 Lube Y Notes MECH - 4C X 1410 Partn number 5-345XU Series 1410 X 4C Style COMBO Width 1 4.188 Width 2 4.250 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Brand SPICER Cap dia 1 1.188 Lube N Notes COATED BEARING CAPS Partn number 5-3615X Series 1350 Style OSR Width 1 2.455 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Brand SPICER Cap dia 1 1.938 Lube Y Notes Lube fitting in cross Partn number 5-407X Series 1760 Style BP Width 1 7.000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Brand UDS Cap dia 1 1.938 Lube Y Notes Lube fitting in cross Partn number 5-407XU Series 1760 Style BP Width 1 7.000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Brand SPICER Cap dia 1 1.438 Lube Y Notes HWD / HWD Partn number 5-4111X Series 4C Style WB Width 1 4.250 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Brand UDS Cap dia 1 1.438 Lube Y Notes HWD / HWD Partn number 5-4143X Series 4C Style WB Width 1 4.250 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
