Brand:
5-297X Greasable Universal Joint – 1310WJ Series 5-297X | 1.188X2.188
$11.29
+50 in stock
14
People watching this product now!
Description
5-297X — 1310WJ series, 1.188″ cap, 2.188″ width. Proven greaseable universal joint. Verify cap dia and snap ring style before ordering.
Full Description
The 5-297x is a 1310WJ series -- light-duty trucks (F-150, Silverado 1500, Jeep Wrangler, Ram 1500) inside snap ring retention universal joint measuring 1.188" cap dia | 2.188" width. The 5-297x is greaseable with zerk fitting. Every 5-297x is verified for cap diameter, bearing width, and snap ring groove dimensions before it ships from Universal Driveshafts.
5-297X -- 1310WJ Series Cap & Width Specifications
The it specs: 1.188" cap dia | 2.188" width. Cap diameter determines which yoke bore it fits -- the cap must seat fully into the yoke without play. Bearing width (2.188" across the body) controls the span between yoke ears. A cross that is too wide won't fit; too narrow and the snap rings don't seat in the groove. DANA 30 - DANA 35 , DANA 44 FRONT AXLE SHAFT BETWEEN FORD MPAR AND GM.
Verify the yoke bore diameter against the this unit cap size before installing. The snap ring style (inside snap ring retention) must match the yoke groove pattern -- OSR yokes have an external groove; ISR yokes have an internal groove. The the assembly requires a grease gun at installation and at regular service intervals. Correct installation torque on the strap kit or U-bolt is critical -- undertorqued straps allow the cap to walk under load.
Installation Notes for this u-joint
Before installing the it, clean the yoke bores of any rust, burrs, or old bearing material. The bearing cups must drop in by hand -- never drive them in with a hammer directly on the cup. Use a proper cross-and-bearing installation tool or a press. Driving a cup in at an angle cocks the needle bearings and destroys the the part before it ever sees load.
After installation, verify full rotation without binding. A binding cross indicates a cup is cocked or seated too deep. The this component should articulate freely through the full operating angle of your driveshaft before the vehicle is lowered off the lift.
Key Features
- Series: 1310WJ series -- light-duty trucks (F-150, Silverado 1500, Jeep Wrangler, Ram 1500)
- Cap dia: 1.188" -- must match yoke bore exactly
- Width: 2.188" -- controls yoke ear span
- Style: inside snap ring retention -- verify yoke groove type before ordering
- Greaseable -- zerk fitting included, service at regular intervals
- Part number: 5-760X
- Brand: UDS
- Note: DANA 30 - DANA 35 , DANA 44 FRONT AXLE SHAFT BETWEEN FORD MPAR AND GM
Specifications
- SKU: this u-jointU
- Part Number: 5-760X
- Brand: UDS
- Series: 1310WJ
- Cap Dia 1: 1.188"
- Width 1: 2.188"
- Snap Ring Style: ISR
- Lube: Yes -- grease fitting
- Notes: DANA 30 - DANA 35 , DANA 44 FRONT AXLE SHAFT BETWEEN FORD MPAR AND GM
Additional information
| Series |
1310WJ |
|---|---|
| Lube |
Yes |
| Style |
ISR |
| Cap dia 1 |
1.188 |
| Width 1 |
2.188 |
| Partn number |
5-760X |
| Brand |
UDS |
| Notes |
DANA 30 – DANA 35 , DANA 44 FRONT AXLE SHAFT BETWEEN FORD MPAR AND GM |
More Parts from the same Category
Filters Sort results
Reset Apply
Image | Part # | Part Details | Price | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Univeral Joints (218) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Brand SPICER Cap dia 1 1.625 Cap dia 2 1.938 Lube Y Notes OSR/ WB MECH 1650X7C Partn number 5-330X Series 1650X7C Style COMBO Width 1 5.594 Width 2 5.531 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Brand UDS Cap dia 1 1.625 Cap dia 2 1.938 Lube Y Notes OSR/ WB MECH 1650X7C Partn number 5-330XU Series 1650X7C Style COMBO Width 1 5.594 Width 2 5.844 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Brand SPICER Cap dia 1 1.188 Cap dia 2 1.438 Lube Y Notes MECH - 4C X 1410 Partn number 5-345X Series 1410 X 4 C Style COMBO Width 1 4.188 Width 2 4.250 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Brand UDS Cap dia 1 1.188 Cap dia 2 1.438 Lube Y Notes MECH - 4C X 1410 Partn number 5-345XU Series 1410 X 4C Style COMBO Width 1 4.188 Width 2 4.250 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Brand SPICER Cap dia 1 1.188 Lube N Notes COATED BEARING CAPS Partn number 5-3615X Series 1350 Style OSR Width 1 2.455 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Brand SPICER Cap dia 1 1.938 Lube Y Notes Lube fitting in cross Partn number 5-407X Series 1760 Style BP Width 1 7.000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Brand UDS Cap dia 1 1.938 Lube Y Notes Lube fitting in cross Partn number 5-407XU Series 1760 Style BP Width 1 7.000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Brand SPICER Cap dia 1 1.438 Lube Y Notes HWD / HWD Partn number 5-4111X Series 4C Style WB Width 1 4.250 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Brand UDS Cap dia 1 1.438 Lube Y Notes HWD / HWD Partn number 5-4143X Series 4C Style WB Width 1 4.250 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Brand SPICER Cap dia 1 1.063 Lube Y Notes LUBE FITTING IS IN BEARING CAP Partn number 5-433X Series 1210 Style OSR Width 1 2.438 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
