Driveshaft – Chrysler | 300 | 2WD | 5.7L & 6.4L | 2015-19 | Automatic
$1,585.89
Description
Direct-fit aluminum driveshaft 3.5A1350_2894-442_C3 for the 2015 – 2019 Chrysler Charger, 3.5″ OD OD, Series 1350 joints, pre-balanced and ready to install.
Full Description
The 3.5A1350_2894-442_C3 is engineered from the ground up for 2015 - 2019 Chrysler Charger drivetrain restoration and performance builds. Manufactured from 3.5" OD aluminum tubing and coupled to Series 1350 U-joint ends, this shaft is dynamically balanced to within OEM specifications before shipping. Auto fitment is confirmed against factory build data for a no-guesswork installation experience.
Specifications -- 3.5A1350_2894-442_C3
| Specification | Value |
|---|---|
| Part Number / SKU | 3.5A1350_2894-442_C3 |
| Vehicle | Chrysler |
| Model | Charger |
| Year Range | 2015 - 2019 |
| Transmission / Drive | Auto |
| Tube Diameter | 3.5" OD |
| U-Joint Series | 1350 |
| Material | ALUMINUM |
| Overall Length | 69.00" |
Vehicle Fitment Details
The 3.5A1350_2894-442_C3 is designed specifically for the 2015 - 2019 Chrysler Charger with Auto drivetrain. Before ordering, confirm that your vehicle's transmission output yoke and rear axle pinion yoke both specify Series 1350 U-joint geometry. Overall collapsed length is 69.00" -- verify against the existing shaft with the vehicle at ride height.
- Confirm year, model, and cab/bed or wheelbase against the product listing
- Check both yoke series before ordering to avoid mismatch
- Inspect carrier bearing and crossmember condition if the vehicle had previous vibration issues
Engineering & Balance
Aluminum driveshafts like the 3.5A1350_2894-442_C3 offer measurable benefits over steel replacements in street and light-performance applications. Reduced rotating weight decreases drivetrain inertia, improving acceleration response and reducing stress on transmission output and axle pinion bearings. The 3.5" OD OD provides ample torsional stiffness for the 1350 joint series torque rating, while maintaining the clearances required by the factory undercarriage.
- Lower unsprung rotational mass vs. steel OEM shaft
- Precision dynamic balance reduces NVH (noise, vibration, harshness)
- Corrosion-resistant surface -- no annual undercoating required
- Direct bolt-in: no transmission crossmember or tunnel modification
Installation Overview
Installing the 3.5A1350_2894-442_C3 requires standard hand tools and a floor jack. Support the rear axle independently before removing the factory shaft. Match-mark the rear yoke before removal so the new shaft can be phased identically. Torque all flange bolts or U-bolt nuts to the vehicle manufacturer's specification and re-check after the first 50 miles.
Order with Confidence from Universal Driveshafts
Universal Driveshafts specializes in direct-fit replacement and performance driveshaft assemblies. The 3.5A1350_2894-442_C3 is built to order and ships with a full dynamic balance certification. Contact our technical staff for wheelbase-specific length verification or to discuss an upgraded joint series if you are running a modified powertrain.
Additional information
| Vehicle | Chrysler |
|---|---|
| Tube diameter | 3.5″ OD |
| d-year | 2015 – 2019 |
| Transmission | Auto |
| Overall len | 69.00″ |
| Material | ALUMINUM |
| Series | 1350 |
| Model | Charger |
More Parts from the same Category
Filters Sort results
Reset Apply
Image | Part # | Part Details | Price | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Certifed Driveshafts (12) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | Series 1810 CL TO CB 33.250 Brand OEM SPICER | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Series 1810 CL TO CB 40" Brand OEM SPICER | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Series 1810 CL TO CB 41" Brand OEM SPICER | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Series 1810 CL TO CB 44" Brand OEM SPICER | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Series 1810 CL TO CB 45.250" Brand OEM SPICER | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Series 1810 CL TO CB 51" Brand OEM SPICER | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Series 1810 CL TO CB 53.750" Brand OEM SPICER | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Series SPL170 CL to CL 35.500" Brand OEM SPICER | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Series SPL170 CL TO CB 44" Brand OEM SPICER | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| | Series SPL170 CL TO CB 47" Brand OEM SPICER | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
