Heavy Duty 1810 Series Driveshaft Center U-Joint To Center Bearing = 53.750″ – Open u-joint to Midship End Yoke, Certified Driveshaft OEM SPICER

DSS-1810EYC53.750 OEM SPICER 1810 Series Driveshaft Open U-Joint to Midship End Yoke

The DSS-1810EYC53.750 is a certified 1810 series driveshaft manufactured by OEM SPICER, configured as open U-joint to midship end yoke. The center U-joint to center bearing (CL-to-CB) length is 53.750", representing the front shaft segment span in a two-piece drivetrain from the forward U-joint centerline to the center support bearing centerline.

Specifications

• Part Number: DSS-1810EYC53.750
• Brand: OEM SPICER
• Series: 1810
• CL to CB: 53.750"
• Configuration: Open U-Joint to Midship End Yoke
• Category: Certified Driveshaft / Premade Driveshaft

When fitting the DSS-1810EYC53.750, verify the vehicle's CL-to-CB measurement is 53.750" at static ride height. The 1810 series is rated for Class 5-6 commercial truck drivetrains. At 53.750", this is among the longer front-section lengths in the 1810 series lineup — confirm the center bearing bracket bolt pattern and bore ID match the midship stub before assembly. All companion yokes must be rated to 1810 series.

The DSS-1810EYC53.750 is built to OEM SPICER factory specifications as a certified driveshaft. When cross-referencing fleet maintenance records, the 53.750" CL-to-CB distinguishes this shaft from the 51" variant in the same family. A 2.750" difference in CL-to-CB length creates a measurable fitment error in the center bearing position and must be measured at the chassis level before ordering.