When diagnosing driveline issues, the 2719-696 Nose Bushing is a critical component for the BMW 850. If you’re experiencing vibration at highway speeds or noise that seems to come from the center of the driveshaft, this bushing is often the first suspect. A worn or collapsed bushing can lead to misalignment, causing excessive vibration and potential damage to other driveline components.
This bushing features an inside diameter of 17mm, an outer diameter of 28mm, and a height of 20.44mm. These specifications are crucial for maintaining the correct alignment of your two-piece driveshaft. If the center-to-base height is off, it can change the operating angle of the driveshaft, leading to further issues down the line.
When you replace a worn bushing with the 2719-696, you restore the necessary support and alignment, reducing whip and improving overall driveline stability. Remember, during installation, avoid pre-loading the rubber isolator. Proper alignment of the mounting bracket before tightening is essential to ensure optimal performance.
- Inside Diameter: 17mm
- Outer Diameter: 28mm
- Height: 20.44mm
- Application: BMW 850
- Check for rubber deterioration before installation
By addressing these issues with the 2719-696 Nose Bushing, you can significantly enhance the longevity and performance of your BMW 850’s driveline.
