2719-611 – Nose Bushing – 28mm OD – Notes BMW, rubber id

When diagnosing driveline issues, the 2719-611 Nose Bushing is a key component to consider, especially in BMW applications. This bushing, with its 28mm OD, plays a vital role in supporting the center support bearing of a two-piece driveshaft. If you experience vibrations at highway speeds or hear unusual bearing noise, the condition of this bushing could be the culprit. A worn or collapsed rubber isolator can lead to excessive driveline vibration, making it essential to replace it promptly.

The correct dimensions of the 2719-611, particularly its outer diameter, are critical for maintaining the proper alignment of the driveshaft. If the center-to-base height is incorrect, it can alter the operating angle of the driveshaft, leading to further complications. When installing this bushing, ensure that you do not pre-load the rubber isolator during installation. Align the mounting bracket before tightening to avoid unnecessary stress on the bushing.

• 28mm OD for precise fitment in BMW applications
• Replace if you notice vibration at speed or bearing noise
• Check for rubber deterioration during inspection
• Align mounting bracket properly to prevent pre-loading
• Verify driveshaft runout after installation

In summary, the 2719-611 Nose Bushing is essential for restoring proper function and vibration isolation in your BMW's driveline system. Don't overlook this component when addressing driveline vibrations.