零件号 3103-24 (也写作 3103/24) 变速箱叉 1310 Nissan 自动 & 手动 Transmissions It Is Used To Replace the factory staked 万向节
现货5 件准备发货
大多数现货配件在 2pm EST 前下单可当天发货;处理时间可能有所不同。
- 配件订单满 $ 免运费1,000
- 14天退货
- 适配咨询: (813) 524-6491
规格 3103-24 · 1310 Series Transmission Yoke
- 零件编号
- 3103-24
- 零件类型
- 变速箱叉
- 状态
- 全新
- 系列
- 1310
- 轮毂直径
- 1.375
- 花键数量和直径
- 22/24 X 0.995
- 万向节中心到端部
- 6.047
- 锪孔直径
- 1.043
- 重量
- 2.97 lb
适配性
Nissan
1310 系列零件使用 1.062" 万向节轴承盖,卡簧到卡簧宽度为 3.219" (标称)。订购前请确认配对万向节叉或万向节上的轴承盖直径。
互换 / 交叉参考
- 2-3-13461X
3103-24 可替换或互换自 2-3-13461X. 交叉参考编号仅供识别;购买替代件前,请先比对上方的系列、花键和螺栓孔距尺寸。
按您的邮编估算运费
计算运费
从我们在佛罗里达州的仓库提供实时 UPS 运费。配件订单超过 $1,000 免运费 — 传动轴管和完整传动轴始终按 UPS 费率运送。
佛罗里达州本地自提 — 免费
关于 3103-24
3103-24 -- 1310 Nissan Transmission Yoke, 22/24 Splines
The 3103-24 is designed for Nissan passenger car and truck applications using a 22/24-spline, 0.995" PD output shaft -- a specification common across many Nissan automatic and manual transmissions. Like several Nissan OEM designs, these vehicles were assembled with a staked (crimped) U-joint that cannot be field-replaced without specialized tools. This yoke provides the serviceable replacement path, enabling standard snap-ring joint service at any driveshaft shop.
The 0.390" bore depth pilots over the bearing retainer OD for concentric centering, and the 1.375" hub OD must match the tailshaft seal. Cross-reference to Spicer 2-3-11731X for OEM comparison, though the Spicer unit covers a slightly different model range -- verify by measuring your original yoke. The 6.047" center-to-end is specific to this Nissan application; substituting a shorter yoke will reduce slip-tube engagement and increase the likelihood of separation on rough terrain or hard acceleration. This transmission yoke is standard steel construction, appropriate for all production-level Nissan drivetrain loads.
1310 系列中相关的 变速箱叉
查看完整表格
3103-10
变速箱叉, 1310系列, 10 x 1.375 花键, 轮毂直径 2.125"
$65.98现货
3103-11
变速箱叉, 1310系列, 10 x 1.375 花键, 轮毂直径 2.125"
$76.89现货
3103-12
变速箱叉, 1310系列, 10 x 1.375 花键, 轮毂直径 2.125"
$94.11现货
3103-163
Used on Powerglide transmissions which were on early Chevrolet passeng...
$95.03致电
3103-21
1310 Toyota 变速箱叉适用于 passenger cars 和 trucks from Toyota 和 Lex...
$156.93现货
3103-211
1310 Toyota 20/21 花键变速箱叉适用于 passenger cars 和 trucks from Toy...
$76.99现货
3103-23
This 1310 变速箱叉适用于 Toyota & Lexus 自动 Transmissions from as ear...
$84.46现货
3103-23S
MAZDA RX8 AUTO, machined shoulder off 轮毂变速箱叉 1310
$78.46现货
3103-24 问题
3103-24 属于哪个系列?
3103-24 是 1310 系列 变速箱叉。1310 系列标称尺寸为 1.062" 轴承盖,卡簧到卡簧宽度为 3.219". 订购前请测量旧万向节的轴承盖直径以确认系列。
3103-24 有多少个花键齿?
3103-24 经切割适用于 22/24 X 0.995 花键(数量 × 大径)。 请清点输出轴上的花键并测量大径以确认。
3103-24 可替代哪些零件号?
3103-24 交叉对应于 2-3-13461X. 互换数据仅供参考;替代前请比对尺寸。
3103-24 有现货吗?
是的。佛罗里达仓库有 5 件现货。工作日美东标准时间(EST)下午2点前下的订单大多当天发货。