Part No. 3103-11 (also written 3103/11) Transmission Yokes, 1310 Series, 10 x 1.375 Splines, 2.125" Hub Dia
In stock1 ready to ship
Most stock parts ship the same day when ordered before 2pm EST; processing times may vary.
- Free shipping on parts orders over $1,000
- 14-day returns
- Fitment help: (813) 524-6491
Specifications 3103-11 · 1310 Series Transmission Yoke
- Part number
- 3103-11
- Part type
- Transmission Yoke
- Condition
- New
- Series
- 1310
- Hub diameter
- 2.125
- Splines count diameter
- 10 x 1.375
- Counter bore diameter
- 1.000
- Center u-joint to end
- 3.438
- Weight
- 2.88 lb
Fitment
Used in boat applications, Fits onto standard jet drive
1310 series parts use 1.062" u-joint bearing caps on a 3.219" snap-ring-to-snap-ring width (nominal). Confirm the cap diameter on the mating yoke or joint before ordering.
Estimate shipping to your ZIP
Estimate shipping
Live UPS rates from our shop in Florida. Parts orders over $1,000 ship free — tubing and complete driveshafts always ship at the UPS rate.
Local pickup in Florida — free
About 3103-11
The 3103-11 sits between the short (3103-10) and medium-long (3103-12) jet drive transmission yokes at 3.375" center-to-end. The 1.000" counterbore is 0.125" larger than the 3103-10's 0.875" bore -- this difference corresponds to different jet pump coupling pilot ODs used by different pump manufacturers. Measure the pump input coupling pilot before ordering rather than guessing. The 2.125" hub OD is standard across all three jet-drive yoke variants (3103-10, 11, 12) and interfaces with the same pump input bore. Replace the 1310-series U-joint and yoke together when evidence of corrosion is found in the needle bearing bores -- marine environments cause accelerated pitting that makes individual component replacement less cost-effective than a complete joint assembly.
Related Transmission Yokes in the 1310 series
See the full table
3103-10
Transmission Yokes, 1310 Series, 10 x 1.375 Splines, 2.125" Hub Dia
$65.98In stock
3103-12
Transmission Yokes, 1310 Series, 10 x 1.375 Splines, 2.125" Hub Dia
$94.11In stock
3103-163
Used on Powerglide transmissions which were on early Chevrolet passeng...
$95.03Call
3103-21
1310 Toyota Transmission Yoke fits passenger cars and trucks from Toyo...
$156.93In stock
3103-211
1310 Toyota 20/21 Splines Transmission Yoke fits passenger cars and tr...
$76.99In stock
3103-23
This 1310 Transmission Yoke Fits Toyota & Lexus Automatic Transmission...
$84.46In stock
3103-23S
MAZDA RX8 AUTO, machined shoulder off hub Transmission Yoke 1310
$78.46In stock
3103-24
Transmission Yoke 1310 Nissan Automatic & Manual Transmissions It Is U...
$91.65In stock
3103-11 questions
What series is 3103-11?
3103-11 is a 1310 series transmission yoke. Nominal 1310 dimensions are 1.062" bearing caps on a 3.219" snap-ring-to-snap-ring width. Measure the cap diameter on your old joint to confirm the series before ordering.
What spline count does 3103-11 have?
3103-11 is cut for 10 x 1.375 splines (count × major diameter). Count the splines on the output shaft and measure across the major diameter to confirm.
Is 3103-11 in stock?
Yes. 1 is in stock in Florida. Most stock orders placed before 2 pm EST on a weekday ship the same day.