3103-24 1310 Series Transmission Yoke

Part No. 3103-24 (also written 3103/24) Transmission Yoke 1310 Nissan Automatic & Manual Transmissions It Is Used To Replace the factory staked universal joint

$91.65

In stock5 ready to ship

Most stock parts ship the same day when ordered before 2pm EST; processing times may vary.

  • Free shipping on parts orders over $1,000
  • 14-day returns
  • Fitment help: (813) 524-6491

Specifications 3103-24 · 1310 Series Transmission Yoke

How to measurePoint at a letter to read its measurement
BADEC
Part number
3103-24
Part type
Transmission Yoke
Condition
New
Series
1310
Hub diameter
1.375
Splines count diameter
22/24 X 0.995
Center u-joint to end
6.047
Counter bore diameter
1.043
Weight
2.97 lb

Fitment

Nissan

1310 series parts use 1.062" u-joint bearing caps on a 3.219" snap-ring-to-snap-ring width (nominal). Confirm the cap diameter on the mating yoke or joint before ordering.

Interchange / cross-reference

  • 2-3-13461X

3103-24 replaces or interchanges with 2-3-13461X. Cross-reference numbers are supplied for identification; compare the series, spline and bolt-pattern dimensions above before substituting.

Estimate shipping to your ZIP

Estimate shipping

Live UPS rates from our shop in Florida. Parts orders over $1,000 ship free — tubing and complete driveshafts always ship at the UPS rate.

Local pickup in Florida — free

About 3103-24

3103-24 -- 1310 Nissan Transmission Yoke, 22/24 Splines

The 3103-24 is designed for Nissan passenger car and truck applications using a 22/24-spline, 0.995" PD output shaft -- a specification common across many Nissan automatic and manual transmissions. Like several Nissan OEM designs, these vehicles were assembled with a staked (crimped) U-joint that cannot be field-replaced without specialized tools. This yoke provides the serviceable replacement path, enabling standard snap-ring joint service at any driveshaft shop.

The 0.390" bore depth pilots over the bearing retainer OD for concentric centering, and the 1.375" hub OD must match the tailshaft seal. Cross-reference to Spicer 2-3-11731X for OEM comparison, though the Spicer unit covers a slightly different model range -- verify by measuring your original yoke. The 6.047" center-to-end is specific to this Nissan application; substituting a shorter yoke will reduce slip-tube engagement and increase the likelihood of separation on rough terrain or hard acceleration. This transmission yoke is standard steel construction, appropriate for all production-level Nissan drivetrain loads.

Related Transmission Yokes in the 1310 series

See the full table

3103-24 questions

What series is 3103-24?

3103-24 is a 1310 series transmission yoke. Nominal 1310 dimensions are 1.062" bearing caps on a 3.219" snap-ring-to-snap-ring width. Measure the cap diameter on your old joint to confirm the series before ordering.

What spline count does 3103-24 have?

3103-24 is cut for 22/24 X 0.995 splines (count × major diameter). Count the splines on the output shaft and measure across the major diameter to confirm.

What part numbers does 3103-24 replace?

3103-24 cross-references to 2-3-13461X. Interchange data is for reference; compare the dimensions before substituting.

Is 3103-24 in stock?

Yes. 5 are in stock in Florida. Most stock orders placed before 2 pm EST on a weekday ship the same day.