部品番号 3103-24 (別表記 3103/24) トランスミッションヨーク 1310 Nissan オートマチック & Manual Transmissions It Is Used To Replace the factory staked ユニバーサルジョイント
在庫あり5 件の出荷準備完了
在庫品の多くは 2pm(EST)までのご注文で当日発送いたします。処理時間は前後する場合があります。
- 部品注文の送料無料金額 $1,000
- 14日以内返品可能
- 適合に関するサポート: (813) 524-6491
仕様 3103-24 · 1310 Series Transmission Yoke
- 部品番号
- 3103-24
- パーツタイプ
- トランスミッションヨーク
- 状態
- 新品
- シリーズ
- 1310
- ハブ径
- 1.375
- スプライン数と径
- 22/24 X 0.995
- ユニバーサルジョイント中心から端部まで
- 6.047
- 裏座ぐり径
- 1.043
- 重量
- 2.97 lb
適合性
Nissan
1310 シリーズのパーツには 1.062" ユニバーサルジョイントのベアリングキャップを使用します スナップリング間幅 3.219" (公称)。ご注文前に、相手側のヨークまたはジョイントのキャップ径をご確認ください。
互換品 / クロスレファレンス
- 2-3-13461X
3103-24 は 2-3-13461X と互換性があります。相互参照番号は識別用です。交換前に、上記のシリーズ、スプライン、ボルトパターンの寸法をご確認ください。
郵便番号への送料を見積もる
送料を計算
フロリダの弊社ショップからのリアルタイム UPS 送料。パーツのご注文が $1,000 送料無料 — チューブおよび完全なプロペラシャフトは常にUPSの料金で発送されます。
フロリダでの店頭受取 — 無料
3103-24 について
3103-24 -- 1310 Nissan Transmission Yoke, 22/24 Splines
The 3103-24 is designed for Nissan passenger car and truck applications using a 22/24-spline, 0.995" PD output shaft -- a specification common across many Nissan automatic and manual transmissions. Like several Nissan OEM designs, these vehicles were assembled with a staked (crimped) U-joint that cannot be field-replaced without specialized tools. This yoke provides the serviceable replacement path, enabling standard snap-ring joint service at any driveshaft shop.
The 0.390" bore depth pilots over the bearing retainer OD for concentric centering, and the 1.375" hub OD must match the tailshaft seal. Cross-reference to Spicer 2-3-11731X for OEM comparison, though the Spicer unit covers a slightly different model range -- verify by measuring your original yoke. The 6.047" center-to-end is specific to this Nissan application; substituting a shorter yoke will reduce slip-tube engagement and increase the likelihood of separation on rough terrain or hard acceleration. This transmission yoke is standard steel construction, appropriate for all production-level Nissan drivetrain loads.
1310 シリーズの関連する トランスミッションヨーク
全一覧表を見る
3103-10
トランスミッションヨーク, 1310シリーズ, 10 x 1.375 スプライン, ハブ径...
$65.98在庫あり
3103-11
トランスミッションヨーク, 1310シリーズ, 10 x 1.375 スプライン, ハブ径...
$76.89在庫あり
3103-12
トランスミッションヨーク, 1310シリーズ, 10 x 1.375 スプライン, ハブ径...
$94.11在庫あり
3103-163
Used on Powerglide transmissions which were on early Chevrolet passeng...
$95.03電話する
3103-21
1310 Toyota トランスミッションヨーク適合 passenger cars および trucks...
$156.93在庫あり
3103-211
1310 Toyota 20/21 スプライントランスミッションヨーク適合 passenger car...
$76.99在庫あり
3103-23
This 1310 トランスミッションヨーク適合 Toyota & Lexus オートマチック T...
$84.46在庫あり
3103-23S
MAZDA RX8 AUTO, machined shoulder off ハブトランスミッションヨーク 131...
$78.46在庫あり
3103-24 ご質問
3103-24 はどのシリーズですか?
3103-24 は 1310 シリーズの トランスミッションヨーク です。 1310 シリーズの公称寸法は 1.062" ベアリングキャップです スナップリング間幅 3.219"。ご注文前に、古いジョイントのキャップ径を測ってシリーズをご確認ください。
3103-24 のスプライン数はいくつですか?
3103-24 はスプライン 22/24 X 0.995(山数 × 外径)用に加工されています。 出力シャフトのスプライン数を数え、外径(最大径)を測って確認してください。
3103-24 はどの部品番号の代替品ですか?
3103-24 は 2-3-13461X とクロスリファレンス対応しています。互換データは参考情報です。交換前に寸法をご確認ください。
3103-24 の在庫はありますか?
はい。フロリダ州に 5 点の在庫がございます。平日の東部標準時(EST)午後2時までのご注文の多くは、当日中に発送いたします。