Small Parts

454 parts in 19 categories.

Balance Weights 46 parts Driveshaft balance weights are welded to the tube during balancing. Choose by weight (ounces or pounds), style and material; stainless weights are used on aluminum tube.
Boot Cans & Bearing Retainers 10 parts
Boot Clamps 26 parts
Boot Kits 33 parts Boot kits seal a driveshaft's slip joint or CV joint against dirt and water and keep the grease in. Match the large and small boot diameters and the length, and use the clamps listed with each kit.
CV Ball Kits 13 parts A CV ball (centering) kit rebuilds the ball and socket that keep a double-cardan joint centered; kits include the socket, spring and seals. Order by the ball stud diameter and the socket bore, and choose greaseable or non-greaseab...
Dust cap Press On & Threaded 57 parts Slip yoke dust caps keep grit out of the splines. Press-on caps are sized by the yoke boss diameter; threaded caps by the thread size on the yoke. Match the series listed.
Hardware 60 parts Bolts, washers and miscellaneous driveline hardware by thread size and grade.
Increase Bushings 35 parts Increase bushings are adapter rings that let a weld yoke, ball stud yoke or spline made for one tube size be welded into a larger tube (for example 2.5" to 3.0" OD). Match the bushing's inside diameter to the yoke's butt diameter...
Keyway 2 parts Keys and keystock for keyed PTO bores. Match the key width and length to the keyway in the yoke.
Lube Zerk Fittings 8 parts Grease (zerk) fittings for greaseable u-joints and slip yokes, by thread size and angle. Check whether your joint takes a straight or angled fitting.
Nose Bushing 10 parts Nose bushings (centering bushings) are pressed into the transmission or differential flange and center the driveshaft nose on flex-disc (giubo) and prong-flange shafts, mostly BMW and other imports. Replace them whenever the shaft...
Nuts 22 parts Pinion and yoke nuts by thread size and grade. Match the thread diameter and pitch to the shaft; use a new nut when the old one was staked or had a locking insert.
Snap Rings 44 parts
Strap Kits 35 parts Strap kits hold the u-joint bearing caps in a strap-style end yoke. They are series-specific: a 1310 strap will not fit a 1350 yoke. Kits include two straps and four bolts.
U Bolt Kits 9 parts U-bolt kits clamp the u-joint caps into a u-bolt style end yoke. They are series-specific; each kit includes two u-bolts, lock washers and nuts.
U-Joint Lock Straps & Wires 13 parts
U-Joint Seal Protectors 12 parts
Washers & Snap Rings 19 parts Snap rings and washers retain u-joint caps and set bearing position. Snap rings are sized to the series and to the cap groove style (inside or outside); thickness is used to center the joint.