零件号 3103-12 (也写作 3103/12) 变速箱叉, 1310系列, 10 x 1.375 花键, 轮毂直径 2.125"
现货1 件准备发货
大多数现货配件在 2pm EST 前下单可当天发货;处理时间可能有所不同。
- 配件订单满 $ 免运费1,000
- 14天退货
- 适配咨询: (813) 524-6491
规格 3103-12 · 1310 Series Transmission Yoke
- 零件编号
- 3103-12
- 零件类型
- 变速箱叉
- 状态
- 全新
- 系列
- 1310
- 轮毂直径
- 2.125
- 花键数量和直径
- 10 x 1.375
- 万向节中心到端部
- 4.875
- 锪孔直径
- 875
- 重量
- 4.13 lb
适配性
Used in boat applications, Fits onto standard jet drive
1310 系列零件使用 1.062" 万向节轴承盖,卡簧到卡簧宽度为 3.219" (标称)。订购前请确认配对万向节叉或万向节上的轴承盖直径。
按您的邮编估算运费
计算运费
从我们在佛罗里达州的仓库提供实时 UPS 运费。配件订单超过 $1,000 免运费 — 传动轴管和完整传动轴始终按 UPS 费率运送。
佛罗里达州本地自提 — 免费
关于 3103-12
3103-12 -- 1310 Marine Jet Drive Transmission Yoke
The 3103-12 is designed for standard marine jet-drive installations where the engine output shaft uses a 10-spline, 1.375" pitch diameter interface. The oversized 2.125" hub diameter is a distinguishing feature of jet-drive yokes -- the larger diameter accommodates the heavy-wall housing bore of the jet pump input coupling. The 0.875" counterbore seats on the pump coupling pilot to maintain alignment, which is critical in a marine environment where vibration from water ingestion can otherwise accelerate coupling wear.
At 4.875" center-to-end, this transmission yoke is sized for standard jet pump geometry. The 10-spline count is much lower than automotive applications -- these splines carry torque rather than provide fine-pitch indexing, so they rely on a tight interference fit rather than close-clearance slip engagement. Apply anti-seize compound to the splines during installation to prevent corrosion bonding in the marine environment. The 1310-series U-joint at the output end (1.062" cap) should be replaced annually or every 100 hours in saltwater applications, whichever comes first.
1310 系列中相关的 变速箱叉
查看完整表格
3103-10
变速箱叉, 1310系列, 10 x 1.375 花键, 轮毂直径 2.125"
$65.98现货
3103-11
变速箱叉, 1310系列, 10 x 1.375 花键, 轮毂直径 2.125"
$76.89现货
3103-163
Used on Powerglide transmissions which were on early Chevrolet passeng...
$95.03致电
3103-21
1310 Toyota 变速箱叉适用于 passenger cars 和 trucks from Toyota 和 Lex...
$156.93现货
3103-211
1310 Toyota 20/21 花键变速箱叉适用于 passenger cars 和 trucks from Toy...
$76.99现货
3103-23
This 1310 变速箱叉适用于 Toyota & Lexus 自动 Transmissions from as ear...
$84.46现货
3103-23S
MAZDA RX8 AUTO, machined shoulder off 轮毂变速箱叉 1310
$78.46现货
3103-24
变速箱叉 1310 Nissan 自动 & 手动 Transmissions It Is Used To Replace t...
$91.65现货
3103-12 问题
3103-12 属于哪个系列?
3103-12 是 1310 系列 变速箱叉。1310 系列标称尺寸为 1.062" 轴承盖,卡簧到卡簧宽度为 3.219". 订购前请测量旧万向节的轴承盖直径以确认系列。
3103-12 有多少个花键齿?
3103-12 经切割适用于 10 x 1.375 花键(数量 × 大径)。 请清点输出轴上的花键并测量大径以确认。
3103-12 有现货吗?
是的。佛罗里达仓库有 1 件现货。工作日美东标准时间(EST)下午2点前下的订单大多当天发货。