3103-12 1310 Series Transmission Yoke

部品番号 3103-12 (別表記 3103/12) トランスミッションヨーク, 1310シリーズ, 10 x 1.375 スプライン, ハブ径 2.125"

$94.11

在庫あり1 件の出荷準備完了

在庫品の多くは 2pm(EST)までのご注文で当日発送いたします。処理時間は前後する場合があります。

  • 部品注文の送料無料金額 $1,000
  • 14日以内返品可能
  • 適合に関するサポート: (813) 524-6491

仕様 3103-12 · 1310 Series Transmission Yoke

計測方法文字にカーソルを合わせると、その寸法が表示されます
BADEC
部品番号
3103-12
パーツタイプ
トランスミッションヨーク
状態
新品
シリーズ
1310
ハブ径
2.125
スプライン数と径
10 x 1.375
ユニバーサルジョイント中心から端部まで
4.875
裏座ぐり径
875
重量
4.13 lb

適合性

Used in boat applications, Fits onto standard jet drive

1310 シリーズのパーツには 1.062" ユニバーサルジョイントのベアリングキャップを使用します スナップリング間幅 3.219" (公称)。ご注文前に、相手側のヨークまたはジョイントのキャップ径をご確認ください。

郵便番号への送料を見積もる

送料を計算

フロリダの弊社ショップからのリアルタイム UPS 送料。パーツのご注文が $1,000 送料無料 — チューブおよび完全なプロペラシャフトは常にUPSの料金で発送されます。

フロリダでの店頭受取 — 無料

3103-12 について

3103-12 -- 1310 Marine Jet Drive Transmission Yoke

The 3103-12 is designed for standard marine jet-drive installations where the engine output shaft uses a 10-spline, 1.375" pitch diameter interface. The oversized 2.125" hub diameter is a distinguishing feature of jet-drive yokes -- the larger diameter accommodates the heavy-wall housing bore of the jet pump input coupling. The 0.875" counterbore seats on the pump coupling pilot to maintain alignment, which is critical in a marine environment where vibration from water ingestion can otherwise accelerate coupling wear.

At 4.875" center-to-end, this transmission yoke is sized for standard jet pump geometry. The 10-spline count is much lower than automotive applications -- these splines carry torque rather than provide fine-pitch indexing, so they rely on a tight interference fit rather than close-clearance slip engagement. Apply anti-seize compound to the splines during installation to prevent corrosion bonding in the marine environment. The 1310-series U-joint at the output end (1.062" cap) should be replaced annually or every 100 hours in saltwater applications, whichever comes first.

1310 シリーズの関連する トランスミッションヨーク

全一覧表を見る

3103-12 ご質問

3103-12 はどのシリーズですか?

3103-12 は 1310 シリーズの トランスミッションヨーク です。 1310 シリーズの公称寸法は 1.062" ベアリングキャップです スナップリング間幅 3.219"。ご注文前に、古いジョイントのキャップ径を測ってシリーズをご確認ください。

3103-12 のスプライン数はいくつですか?

3103-12 はスプライン 10 x 1.375(山数 × 外径)用に加工されています。 出力シャフトのスプライン数を数え、外径(最大径)を測って確認してください。

3103-12 の在庫はありますか?

はい。フロリダ州に 1 点の在庫がございます。平日の東部標準時(EST)午後2時までのご注文の多くは、当日中に発送いたします。

この翻訳はAIによって作成されたものであり、エラーが含まれている可能性があります。ご不明な点がございましたら、(813) 524-6491にお電話いただくか、英語に切り替えてください。